A comparison of La0.75Sr0.25Cr0.5Mn0.5O3-delta and Ni impregnated porous YSZ anodes fabricated in two different ways for SOFCs

doi:10.1016/j.electacta.2010.02.028

IMR OpenIR

	A comparison of La0.75Sr0.25Cr0.5Mn0.5O3-delta and Ni impregnated porous YSZ anodes fabricated in two different ways for SOFCs
	Zhu, Xingbao 1; Lue, Zhe 1; Wei, Bo 1; Liu, Mingliang 1; Huang, Xiqiang 1; Su, Wenhui 1,2
通讯作者	Zhu, Xingbao(zhuxingbao008@163.com)
	2010-04-30
发表期刊	ELECTROCHIMICA ACTA
ISSN	0013-4686
卷号	55 期号:12 页码:3932-3938
摘要	In this paper, La0.75Sr0.25Cr0.5Mn0.5O3-delta (LSCrM) and Ni impregnated porous yttria-stabilized zirconia (YSZ) anodes have been fabricated in two different ways. The testing results demonstrated the excellent performance of the anode made by infiltrating a mixture of LSCrM and Ni(NO3)(2) solutions into porous YSZ matrix. After reduction of the anode with hydrogen, an inner nano-network structure with mixed ionic-electronic conducting path has been formed within and between these added particles. A single cell with the anode at 800 degrees C exhibited the maximum power densities of 1151 and 704 mW cm(-2) when dry H-2 and CH4 were used as the fuels, respectively: under the same conditions, the cell performances for LSCrM and Ni impregnated YSZ anode separately were 810 and 508 mW cm(-2). A cavity model was proposed to simulate the impregnating process and the loading was calculated. No carbon deposition was detected in the anode, even with the presence of Ni, after operation in dry CH4 for about 6 h under open-circuit condition. (C) 2010 Elsevier Ltd. All rights reserved.
关键词	Solid oxide fuel cells Perovskite oxide La0.75Sr0.25Cr0.5Mn0.5O3-delta Wet impregnation Cavity model
资助者	Ministry of Science and Technology of China
DOI	10.1016/j.electacta.2010.02.028
收录类别	SCI
语种	英语
资助项目	Ministry of Science and Technology of China[2007AA05Z139]
WOS研究方向	Electrochemistry
WOS类目	Electrochemistry
WOS记录号	WOS:000277498000014
出版者	PERGAMON-ELSEVIER SCIENCE LTD
引用统计	被引频次：29[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/101154
专题	中国科学院金属研究所
通讯作者	Zhu, Xingbao
作者单位	1.Harbin Inst Technol, Dept Phys, Ctr Condensed Matter Sci & Technol, Harbin 150080, Peoples R China 2.Int Ctr Mat Phys, Shenyang 110015, Peoples R China
推荐引用方式 GB/T 7714	Zhu, Xingbao,Lue, Zhe,Wei, Bo,et al. A comparison of La0.75Sr0.25Cr0.5Mn0.5O3-delta and Ni impregnated porous YSZ anodes fabricated in two different ways for SOFCs[J]. ELECTROCHIMICA ACTA,2010,55(12):3932-3938.
APA	Zhu, Xingbao,Lue, Zhe,Wei, Bo,Liu, Mingliang,Huang, Xiqiang,&Su, Wenhui.(2010).A comparison of La0.75Sr0.25Cr0.5Mn0.5O3-delta and Ni impregnated porous YSZ anodes fabricated in two different ways for SOFCs.ELECTROCHIMICA ACTA,55(12),3932-3938.
MLA	Zhu, Xingbao,et al."A comparison of La0.75Sr0.25Cr0.5Mn0.5O3-delta and Ni impregnated porous YSZ anodes fabricated in two different ways for SOFCs".ELECTROCHIMICA ACTA 55.12(2010):3932-3938.