PREPARATION OF (Ti, Al)N/Ti2AlN COATINGS

doi:10.3724/SP.J.1037.2009.00754

IMR OpenIR

	PREPARATION OF (Ti, Al)N/Ti2AlN COATINGS
	Dong Yuliang; Yan Xubo; Zhao Shengsheng; Gong Jun; Sun Chao
通讯作者	Sun Chao(csun@imr.ac.cn)
	2010-06-11
发表期刊	ACTA METALLURGICA SINICA
ISSN	0412-1961
卷号	46 期号:6 页码:743-747
摘要	Ti-Al-N coatings with different Ti, Al and N contents were deposited on 1Cr18Ni9Ti stainless steel substrate by vacuum cathode arc ion plating (AIP) method and the as-deposited coatings were annealed under different conditions. The compositions and phases in the as-deposited coatings were also analyzed and compared. The XRD results showed that the composition of the coatings could be controlled by changing the deposition parameters and distinct Ti2AlN phase existed in the annealed coatings. The Ti2AlN phase could not appear unless the annealing temperature reached 650 degrees C. The reactions during the annealing process can be described as AlTi3N+5Al -> TiN+2Al(3)Ti and AlTi3N+3Al -> Ti2AlN+Al3Ti. The content of Ti2AlN phase increased slightly by extending the annealing time. The surface morphology and composition of the annealed coating were analyzed by SEM and the friction coefficient of the coating was measured.
关键词	arc ion plating Ti2AlN coating high temperature annealing friction coefficient
DOI	10.3724/SP.J.1037.2009.00754
收录类别	SCI
语种	英语
WOS研究方向	Metallurgy & Metallurgical Engineering
WOS类目	Metallurgy & Metallurgical Engineering
WOS记录号	WOS:000280030800015
出版者	SCIENCE PRESS
引用统计
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/101165
专题	中国科学院金属研究所
通讯作者	Sun Chao
作者单位	Chinese Acad Sci, State Key Lab Corros & Protect, Inst Met Res, Shenyang 110016, Peoples R China
推荐引用方式 GB/T 7714	Dong Yuliang,Yan Xubo,Zhao Shengsheng,et al. PREPARATION OF (Ti, Al)N/Ti2AlN COATINGS[J]. ACTA METALLURGICA SINICA,2010,46(6):743-747.
APA	Dong Yuliang,Yan Xubo,Zhao Shengsheng,Gong Jun,&Sun Chao.(2010).PREPARATION OF (Ti, Al)N/Ti2AlN COATINGS.ACTA METALLURGICA SINICA,46(6),743-747.
MLA	Dong Yuliang,et al."PREPARATION OF (Ti, Al)N/Ti2AlN COATINGS".ACTA METALLURGICA SINICA 46.6(2010):743-747.