STUDY OF MICROSTRUCTURE AND STRESS CORROSION CRACKING BEHAVIOR IN WELDING TRANSITION ZONE OF Ni-BASED ALLOYS

doi:10.3724/SP.J.1037.2010.00236

IMR OpenIR

	STUDY OF MICROSTRUCTURE AND STRESS CORROSION CRACKING BEHAVIOR IN WELDING TRANSITION ZONE OF Ni-BASED ALLOYS
	Hou Juan 1; Peng Qunjia 2; Shoji, Testuo 2; Wang Jianqiu 1; Ke Wei 1; Han Enhou 1
通讯作者	Wang Jianqiu(jiqwang@imr.ac.cn)
	2010-10-11
发表期刊	ACTA METALLURGICA SINICA
ISSN	0412-1961
卷号	46 期号:10 页码:1258-1266
摘要	Welding technique is generally used in nuclear power plant for manufacturing and machining important components such as steam generator. The similar metal weld and dissimilar metal weld were commonly involved to connect and fixup tubings in steam generators. However, in recent years large amounts of cracking accidents have been observed in the welded joints. A concern has been raised about the integrity and reliability in the joint transition zone due to the high susceptibility of heat affected zone (HAZ) and fusion zone (FZ) to stress corrosion cracking (SCC). In this study, the similar metal and dissimilar metal joints were investigated and compared, focusing on the correlation between microstructure, residual strain and SCC behavior. The microstructures of transition zone in Ni-based Alloys 690 and 52 similar metal joint and Alloys 182 and A533B low alloy steel dissimilar metal joint were investigated comprehensively by SEM, EBSD, TEM. The residual strain distribution in the HAZ of 690-52 similar metal joint was quantitatively measured. The SCC behavior of 182-A533B dissimilar metal joint in high temperature oxygenated water were simulated by creviced bent beam specimen. The HAZ in the similar joint exhibits higher residual strain, sensitive microstructure and high susceptibility to SCC, therefore, the HAZ region deserve more attention during the inspection and examination of components. The FZ of the dissimilar metal joint exhibits complicated microstructure and chemical composition. The type-II which parallels the fusion boundary (FB) and type-I linking the FB and type-II was typical in the FZ of the dissimilar weld. The SCC susceptibility and cracking growth rate are higher at type-II boundary in the FZ. The role of type-I boundary is to lead the crack growth to the FB. After reaching the FB, the crack growth is blunted by pitting. The FB plays a barrier role to the crack growth in the low alloy steel. The FZ in dissimilar metal joint is weak and high susceptible to SCC.
关键词	Ni-based alloy similar/dissimilar metal weld microstructure residual strain stress corrosion cracking
资助者	National Basic Research Program of China
DOI	10.3724/SP.J.1037.2010.00236
收录类别	SCI
语种	英语
资助项目	National Basic Research Program of China[No.G2006CB605000]
WOS研究方向	Metallurgy & Metallurgical Engineering
WOS类目	Metallurgy & Metallurgical Engineering
WOS记录号	WOS:000284195900015
出版者	SCIENCE CHINA PRESS
引用统计	被引频次：14[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/102947
专题	中国科学院金属研究所
通讯作者	Wang Jianqiu
作者单位	1.Chinese Acad Sci, Inst Met Res, State Key Lab Corros & Protect, Shenyang 110016, Peoples R China 2.Tohoku Univ, Fracture & Reliabil Res Inst, Sendai, Miyagi 9808579, Japan
推荐引用方式 GB/T 7714	Hou Juan,Peng Qunjia,Shoji, Testuo,et al. STUDY OF MICROSTRUCTURE AND STRESS CORROSION CRACKING BEHAVIOR IN WELDING TRANSITION ZONE OF Ni-BASED ALLOYS[J]. ACTA METALLURGICA SINICA,2010,46(10):1258-1266.
APA	Hou Juan,Peng Qunjia,Shoji, Testuo,Wang Jianqiu,Ke Wei,&Han Enhou.(2010).STUDY OF MICROSTRUCTURE AND STRESS CORROSION CRACKING BEHAVIOR IN WELDING TRANSITION ZONE OF Ni-BASED ALLOYS.ACTA METALLURGICA SINICA,46(10),1258-1266.
MLA	Hou Juan,et al."STUDY OF MICROSTRUCTURE AND STRESS CORROSION CRACKING BEHAVIOR IN WELDING TRANSITION ZONE OF Ni-BASED ALLOYS".ACTA METALLURGICA SINICA 46.10(2010):1258-1266.