Effect of In-Situ TiB2 Particles on the Microstructure of Spray-Formed 70Si-Al Alloy | |
Zhang, Lei1,2; Gan, Guisheng1; Yang, Bin1,3 | |
Corresponding Author | Yang, Bin(byang@ustb.edu.cn) |
2011-08-01 | |
Source Publication | MATERIALS TRANSACTIONS
![]() |
ISSN | 1345-9678 |
Volume | 52Issue:8Pages:1646-1649 |
Abstract | A novel reactive technique has been employed to fabricate 2.0 mass%TiB2/70Si-Al composite. The growth behavior of primary Si phase in the 2.0 mass%TiB2/70Si-Al composite was investigated when the composite was heated in its semi-solid state. Both theoretical and experimental results have shown that the in-situ TiB2 particles can refine effectively the primary Si phase and restrain the Si phase growth. The coarsening rate constant of the 2.0 mass%TiB2/70Si-Al composite was calculated as 3.69 x 10(-18) m(3)/s, which is less than that of 70Si-Al alloy (7.6 x 10(-17) m(3)/s), suggesting that the in-situ TiB2 particles can effectively pin the grain boundaries and arrest the migration of liquid film when the composite was heated in its semi-solid state. [doi:10.2320/matertrans.M2011066] |
Keyword | 70silicon-aluminum alloy spray forming TiB2 particles grain growth |
Funding Organization | Cultivation Fund of the Key Scientific and Technical Innovation Project ; Ministry of Education of China ; Beijing Municipal Natural Science Foundation ; Youth Foundation of Jiangxi Educational Committee |
DOI | 10.2320/matertrans.M2011066 |
Indexed By | SCI |
Language | 英语 |
Funding Project | Cultivation Fund of the Key Scientific and Technical Innovation Project ; Ministry of Education of China[707007] ; Beijing Municipal Natural Science Foundation[2093040] ; Youth Foundation of Jiangxi Educational Committee[GJJ10198] |
WOS Research Area | Materials Science ; Metallurgy & Metallurgical Engineering |
WOS Subject | Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering |
WOS ID | WOS:000295711700024 |
Publisher | JAPAN INST METALS |
Citation statistics | |
Document Type | 期刊论文 |
Identifier | http://ir.imr.ac.cn/handle/321006/104004 |
Collection | 中国科学院金属研究所 |
Corresponding Author | Yang, Bin |
Affiliation | 1.Univ Sci & Technol Beijing, State Key Lab Adv Met & Mat, Beijing 100083, Peoples R China 2.Nanchang Hangkong Univ, Sch Aeronaut Manufacture Engn, Nanchang 330063, Peoples R China 3.Chinese Acad Sci, Int Ctr Mat Phys, Shenyang 110016, Peoples R China |
Recommended Citation GB/T 7714 | Zhang, Lei,Gan, Guisheng,Yang, Bin. Effect of In-Situ TiB2 Particles on the Microstructure of Spray-Formed 70Si-Al Alloy[J]. MATERIALS TRANSACTIONS,2011,52(8):1646-1649. |
APA | Zhang, Lei,Gan, Guisheng,&Yang, Bin.(2011).Effect of In-Situ TiB2 Particles on the Microstructure of Spray-Formed 70Si-Al Alloy.MATERIALS TRANSACTIONS,52(8),1646-1649. |
MLA | Zhang, Lei,et al."Effect of In-Situ TiB2 Particles on the Microstructure of Spray-Formed 70Si-Al Alloy".MATERIALS TRANSACTIONS 52.8(2011):1646-1649. |
Files in This Item: | There are no files associated with this item. |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment