| Modeling of subsequent ferrite formation in C-Mn steel after austenite hot deformation | |
| Lan, YJ; Huang, CJ; Li, DZ; Li, YY | |
| Corresponding Author | Lan, YJ() |
| 2003-03-11 | |
| Source Publication | ACTA METALLURGICA SINICA
 |
| ISSN | 0412-1961 |
| Volume | 39Issue:3Pages:242-248 |
| Abstract | The dislocation density and stored energy of hot deformation were calculated to evaluate quantitatively the effect of hot plastic deformation of austenite on the kinetics of subsequent ferrite transformation. Due to stored energy, the gamma --> alpha equilibrium transformation temperature A(e3) increases to a higher temperature. Under the hot deformation conditions tested, the modeled stored energy is approximately 10-20 J/mol, and the equilibrium temperature A(e3) increases about 10 K, so the practical start transformation temperature moves to higher temperature region. The total driving force DeltaG(gamma-->alpha) of transformation is increased due to the additional stored energy DeltaG(def) too, so the move velocity of the gamma/alpha-interface is quickened. The growth velocity of ferrite increases, which accelerates the transformation progress of ferrite. The equilibrium parameters were calculated by use of super-elements lattice model in continuously cooling. Compared with the results measured in published literature, the modeled transformation dynamics of subsequent ferrite of C-Mn steel after austenite hot deformation agrees well with the measured results. |
| Keyword | C-Mn steel hot deformation stored energy phase transformation dynamics |
| Indexed By | SCI |
| Language | 英语 |
| WOS Research Area | Metallurgy & Metallurgical Engineering |
| WOS Subject | Metallurgy & Metallurgical Engineering |
| WOS ID | WOS:000182216200004 |
| Publisher | SCIENCE CHINA PRESS |
| Citation statistics | |
| Document Type | 期刊论文 |
| Identifier | http://ir.imr.ac.cn/handle/321006/116410 |
| Collection | 中国科学院金属研究所 |
| Corresponding Author | Lan, YJ |
| Affiliation | Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China |
| Recommended Citation GB/T 7714 | Lan, YJ,Huang, CJ,Li, DZ,et al. Modeling of subsequent ferrite formation in C-Mn steel after austenite hot deformation[J]. ACTA METALLURGICA SINICA,2003,39(3):242-248. |
| APA | Lan, YJ,Huang, CJ,Li, DZ,&Li, YY.(2003).Modeling of subsequent ferrite formation in C-Mn steel after austenite hot deformation.ACTA METALLURGICA SINICA,39(3),242-248. |
| MLA | Lan, YJ,et al."Modeling of subsequent ferrite formation in C-Mn steel after austenite hot deformation".ACTA METALLURGICA SINICA 39.3(2003):242-248. |
| Files in This Item: | There are no files associated with this item. | |||||
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment