FINITE ELEMENT SIMULATION OF HOT ROLLING PROCESS FOR SiCp/Al COMPOSITES

IMR OpenIR

	FINITE ELEMENT SIMULATION OF HOT ROLLING PROCESS FOR SiCp/Al COMPOSITES
	Zhou Li 1,2; Wang Changzhou 1; Zhang Xingxing 2; Xiao Bolu 2; Ma Zongyi 2
通讯作者	Ma Zongyi(zyma@imr.ac.cn)
	2015-07-11
发表期刊	ACTA METALLURGICA SINICA
ISSN	0412-1961
卷号	51 期号:7 页码:889-896
摘要	In this work, the hot rolling process of SiCp/2009Al composites is simulated using the fully coupled thermal-stress analysis in Abaqus/Explicit. By the investigation of formation process for rolling along with different fields of temperature, strain rate, strain and stress and their evolutionary history, the hot rolling mechanisms under complicated stress states is achieved. The results show that the maximum principal stress changes from compressive stress to tensile stress at the stage of rolling entrance and a reverse trend replaces it at the exit, and that the compressive stress is dominant in the deformation zone at the steady rolling stage. The temperature drop effect due to heat transfer is far greater than the temperature rise effect due to friction on the plate surface while the temperature rise is embodied in the center due to plastic deformation. Besides, the effect of strain rate on flow stress plays a leading role at the entrance and exit stage, and the flow stress on the plate surface in the deformation region is mainly determined by strain and temperature except the stick zone which is controlled by strain rate, however, the center flow stress in deformation is mainly affected by temperature.
关键词	rolling rheological behavior composites finite element
资助者	National Basic Research Program of China
收录类别	SCI
语种	英语
资助项目	National Basic Research Program of China[2012CB6I9600]
WOS研究方向	Metallurgy & Metallurgical Engineering
WOS类目	Metallurgy & Metallurgical Engineering
WOS记录号	WOS:000358471900016
出版者	SCIENCE PRESS
引用统计	被引频次：9[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/120446
专题	中国科学院金属研究所
通讯作者	Ma Zongyi
作者单位	1.Shenyang Ligong Univ, Sch Mech Engn, Shenyang 110159, Peoples R China 2.Chinese Acad Sci, Inst Met Res, Shenyang Natl Lab Mat Sci, Shenyang 110016, Peoples R China
推荐引用方式 GB/T 7714	Zhou Li,Wang Changzhou,Zhang Xingxing,et al. FINITE ELEMENT SIMULATION OF HOT ROLLING PROCESS FOR SiCp/Al COMPOSITES[J]. ACTA METALLURGICA SINICA,2015,51(7):889-896.
APA	Zhou Li,Wang Changzhou,Zhang Xingxing,Xiao Bolu,&Ma Zongyi.(2015).FINITE ELEMENT SIMULATION OF HOT ROLLING PROCESS FOR SiCp/Al COMPOSITES.ACTA METALLURGICA SINICA,51(7),889-896.
MLA	Zhou Li,et al."FINITE ELEMENT SIMULATION OF HOT ROLLING PROCESS FOR SiCp/Al COMPOSITES".ACTA METALLURGICA SINICA 51.7(2015):889-896.