Effect of Mn Content on Microstructure and Cryogenic Mechanical Properties of a 7% Ni Steel | |
Cao, Hong-Wei1,2; Luo, Xing-Hong2; Zhan, Guo-Feng3; Liu, Shi2 | |
通讯作者 | Luo, Xing-Hong(xhluo@imr.ac.cn) |
2018-07-01 | |
发表期刊 | ACTA METALLURGICA SINICA-ENGLISH LETTERS
![]() |
ISSN | 1006-7191 |
卷号 | 31期号:7页码:699-705 |
摘要 | The effect of Mn content on the microstructure and cryogenic mechanical properties of a 7% Ni steel was investigated within the Mn content range from 0.13% to 0.36%. The microstructure of the steel as determined by optical microscopy, scanning electron microscopy, transmission electron microscopy, electron backscattering diffraction and X-ray diffraction was presented, and the low-temperature mechanical properties were given. The size of prior austenite grain did not change a lot as Mn content increased. Film-like reversed austenite, having high stability, was found mainly in the specimens with lower Mn content; however, in the specimen with the highest Mn content, the role of Mn was not obvious in stabilizing reversed austenite. Besides, with increasing Mn content, the amount of reversed austenite at grain boundaries gradually decreased. The variable Mn content had a significant effect on cryogenic toughness, but not apparent on cryogenic tensile strength or yield strength. An excellent combination of cryogenic tensile and impact properties was obtained when Mn content of steel was 0.13%. |
关键词 | 7% Ni steel Mn content Microstructure Reversed austenite Cryogenic mechanical properties |
资助者 | Wuhan Iron and Steel (Group) Corp. |
DOI | 10.1007/s40195-018-0700-1 |
收录类别 | SCI |
语种 | 英语 |
资助项目 | Wuhan Iron and Steel (Group) Corp. |
WOS研究方向 | Metallurgy & Metallurgical Engineering |
WOS类目 | Metallurgy & Metallurgical Engineering |
WOS记录号 | WOS:000433167400004 |
出版者 | CHINESE ACAD SCIENCES, INST METAL RESEARCH |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | http://ir.imr.ac.cn/handle/321006/128339 |
专题 | 中国科学院金属研究所 |
通讯作者 | Luo, Xing-Hong |
作者单位 | 1.Univ Sci & Technol China, Sch Mat Sci & Engn, Shenyang 110016, Liaoning, Peoples R China 2.Chinese Acad Sci, Inst Met Res, CAS Key Lab Nucl Mat & Safety Assessment, Shenyang 110016, Liaoning, Peoples R China 3.Wuhan Iron & Steel Grp Corp, Res & Dev Ctr, Wuhan 430080, Hubei, Peoples R China |
推荐引用方式 GB/T 7714 | Cao, Hong-Wei,Luo, Xing-Hong,Zhan, Guo-Feng,et al. Effect of Mn Content on Microstructure and Cryogenic Mechanical Properties of a 7% Ni Steel[J]. ACTA METALLURGICA SINICA-ENGLISH LETTERS,2018,31(7):699-705. |
APA | Cao, Hong-Wei,Luo, Xing-Hong,Zhan, Guo-Feng,&Liu, Shi.(2018).Effect of Mn Content on Microstructure and Cryogenic Mechanical Properties of a 7% Ni Steel.ACTA METALLURGICA SINICA-ENGLISH LETTERS,31(7),699-705. |
MLA | Cao, Hong-Wei,et al."Effect of Mn Content on Microstructure and Cryogenic Mechanical Properties of a 7% Ni Steel".ACTA METALLURGICA SINICA-ENGLISH LETTERS 31.7(2018):699-705. |
条目包含的文件 | 条目无相关文件。 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论