| Influence of DC Bias Voltage on Structure and Performance of the Al-Cr-Si-N Coatings Prepared by Arc Ion Plating Technique | |
| Zhang Jiaojiao1; Wang Tiegang1; Yan Bing1; Liu Yuan1; Jiang Sumeng2; Dong Yu1 | |
| Corresponding Author | Wang Tiegang(sytgwang@163.com) |
| 2018-07-01 | |
| Source Publication | RARE METAL MATERIALS AND ENGINEERING
 |
| ISSN | 1002-185X |
| Volume | 47Issue:7Pages:2232-2239 |
| Abstract | Al-Cr-Si-N coatings were deposited by an arc ion plating (AIP) technique at various DC bias voltages. The effects of bias voltage on the microstructure, phase composition, mechanical and wear properties of the Al-Cr-Si-N coatings were investigated. The results show that the AI-Cr-Si-N coating is mainly composed of the hexagonal structure and the face-centered cubic structure of AIN phase. With the increase of substrate bias, the diffraction peak of the coating shifts to the small angle, and compressive stress gradually increases, whose maximum value is -0.77 GPa; however, the hardness and friction coefficient of the coating do not change significantly. When the negative bias of the substrate is -40 V, the characteristic parameters HIE and H-3/E-*2 of the Al-Cr-Si-N coating reach the maximum values of 0.15 and 0.37 GPa, respectively. At the same time, the coating has the best wear resistance and the lowest friction coefficient. |
| Keyword | Al-Cr-Si-N coating microstructure microhardness residual stress friction and wear |
| Indexed By | SCI |
| Language | 英语 |
| WOS Research Area | Materials Science ; Metallurgy & Metallurgical Engineering |
| WOS Subject | Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering |
| WOS ID | WOS:000441099900044 |
| Publisher | NORTHWEST INST NONFERROUS METAL RESEARCH |
| Citation statistics | |
| Document Type | 期刊论文 |
| Identifier | http://ir.imr.ac.cn/handle/321006/129010 |
| Collection | 中国科学院金属研究所 |
| Corresponding Author | Wang Tiegang |
| Affiliation | 1.Tianjin Univ Technol & Educ, Tianjin Key Lab High Speed Cutting & Precis Mfg, Tianjin 300222, Peoples R China 2.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Liaoning, Peoples R China |
| Recommended Citation GB/T 7714 | Zhang Jiaojiao,Wang Tiegang,Yan Bing,et al. Influence of DC Bias Voltage on Structure and Performance of the Al-Cr-Si-N Coatings Prepared by Arc Ion Plating Technique[J]. RARE METAL MATERIALS AND ENGINEERING,2018,47(7):2232-2239. |
| APA | Zhang Jiaojiao,Wang Tiegang,Yan Bing,Liu Yuan,Jiang Sumeng,&Dong Yu.(2018).Influence of DC Bias Voltage on Structure and Performance of the Al-Cr-Si-N Coatings Prepared by Arc Ion Plating Technique.RARE METAL MATERIALS AND ENGINEERING,47(7),2232-2239. |
| MLA | Zhang Jiaojiao,et al."Influence of DC Bias Voltage on Structure and Performance of the Al-Cr-Si-N Coatings Prepared by Arc Ion Plating Technique".RARE METAL MATERIALS AND ENGINEERING 47.7(2018):2232-2239. |
| Files in This Item: | There are no files associated with this item. | |||||
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment