Influence of DC Bias Voltage on Structure and Performance of the Al-Cr-Si-N Coatings Prepared by Arc Ion Plating Technique | |
Zhang Jiaojiao1; Wang Tiegang1; Yan Bing1; Liu Yuan1; Jiang Sumeng2; Dong Yu1 | |
通讯作者 | Wang Tiegang(sytgwang@163.com) |
2018-07-01 | |
发表期刊 | RARE METAL MATERIALS AND ENGINEERING
![]() |
ISSN | 1002-185X |
卷号 | 47期号:7页码:2232-2239 |
摘要 | Al-Cr-Si-N coatings were deposited by an arc ion plating (AIP) technique at various DC bias voltages. The effects of bias voltage on the microstructure, phase composition, mechanical and wear properties of the Al-Cr-Si-N coatings were investigated. The results show that the AI-Cr-Si-N coating is mainly composed of the hexagonal structure and the face-centered cubic structure of AIN phase. With the increase of substrate bias, the diffraction peak of the coating shifts to the small angle, and compressive stress gradually increases, whose maximum value is -0.77 GPa; however, the hardness and friction coefficient of the coating do not change significantly. When the negative bias of the substrate is -40 V, the characteristic parameters HIE and H-3/E-*2 of the Al-Cr-Si-N coating reach the maximum values of 0.15 and 0.37 GPa, respectively. At the same time, the coating has the best wear resistance and the lowest friction coefficient. |
关键词 | Al-Cr-Si-N coating microstructure microhardness residual stress friction and wear |
收录类别 | SCI |
语种 | 英语 |
WOS研究方向 | Materials Science ; Metallurgy & Metallurgical Engineering |
WOS类目 | Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering |
WOS记录号 | WOS:000441099900044 |
出版者 | NORTHWEST INST NONFERROUS METAL RESEARCH |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | http://ir.imr.ac.cn/handle/321006/129010 |
专题 | 中国科学院金属研究所 |
通讯作者 | Wang Tiegang |
作者单位 | 1.Tianjin Univ Technol & Educ, Tianjin Key Lab High Speed Cutting & Precis Mfg, Tianjin 300222, Peoples R China 2.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Liaoning, Peoples R China |
推荐引用方式 GB/T 7714 | Zhang Jiaojiao,Wang Tiegang,Yan Bing,et al. Influence of DC Bias Voltage on Structure and Performance of the Al-Cr-Si-N Coatings Prepared by Arc Ion Plating Technique[J]. RARE METAL MATERIALS AND ENGINEERING,2018,47(7):2232-2239. |
APA | Zhang Jiaojiao,Wang Tiegang,Yan Bing,Liu Yuan,Jiang Sumeng,&Dong Yu.(2018).Influence of DC Bias Voltage on Structure and Performance of the Al-Cr-Si-N Coatings Prepared by Arc Ion Plating Technique.RARE METAL MATERIALS AND ENGINEERING,47(7),2232-2239. |
MLA | Zhang Jiaojiao,et al."Influence of DC Bias Voltage on Structure and Performance of the Al-Cr-Si-N Coatings Prepared by Arc Ion Plating Technique".RARE METAL MATERIALS AND ENGINEERING 47.7(2018):2232-2239. |
条目包含的文件 | 条目无相关文件。 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论