Influence of temperature on the strain rate sensitivity and deformation mechanisms of nanotwinned Cu | |
Yang, L. W.1; Wang, C. Y.1; Monclus, M. A.1; Lu, L.2; Molina-Aldareguia, J. M.1; Llorca, J.1,3 | |
Corresponding Author | Molina-Aldareguia, J. M.(jon.molina@imdea.org) ; Llorca, J.(javier.llorca@imdea.org) |
2018-09-01 | |
Source Publication | SCRIPTA MATERIALIA
![]() |
ISSN | 1359-6462 |
Volume | 154Pages:54-59 |
Abstract | The mechanical behavior of nanotwinned Cu was studied through indentation creep and constant strain rate indentation tests from 25 degrees C to 200 degrees C. The results showed an enhanced strain rate sensitivity of nanotwinned Cu with temperature, which was higher than that found in coarse-grained Cu. Transmission electron microscopy revealed the same deformation mechanism in the whole temperature range: confined dislocation slip between coherent twin boundaries and formation of dislocation pile-ups at the coherent twin boundaries. The mechanisms responsible for large increase in strain rate sensitivity of nanotwinned Cu with temperature were discussed to the light of experimental observations. (C) 2018 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved. |
Keyword | Nano twinned Cu Indentation High temperature deformation Strain rate sensitivity |
Funding Organization | European Research Council (ERC) under the EU ; China Scholarship Council |
DOI | 10.1016/j.scriptamat.2018.05.018 |
Indexed By | SCI |
Language | 英语 |
Funding Project | European Research Council (ERC) under the EU[669141] ; China Scholarship Council[201306110007] ; China Scholarship Council[201406290011] |
WOS Research Area | Science & Technology - Other Topics ; Materials Science ; Metallurgy & Metallurgical Engineering |
WOS Subject | Nanoscience & Nanotechnology ; Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering |
WOS ID | WOS:000440775000012 |
Publisher | PERGAMON-ELSEVIER SCIENCE LTD |
Citation statistics | |
Document Type | 期刊论文 |
Identifier | http://ir.imr.ac.cn/handle/321006/129038 |
Collection | 中国科学院金属研究所 |
Corresponding Author | Molina-Aldareguia, J. M.; Llorca, J. |
Affiliation | 1.IMDEA Mat Inst, C Eric Kandel 2, Madrid 28906, Spain 2.Chinese Acad Sci, Shenyang Natl Lab Mat Sci, Inst Met Res, Shenyang 110016, Liaoning, Peoples R China 3.Univ Politecn Madrid, Dept Mat Sci, ETS Ingenieros Caminos, Madrid 28040, Spain |
Recommended Citation GB/T 7714 | Yang, L. W.,Wang, C. Y.,Monclus, M. A.,et al. Influence of temperature on the strain rate sensitivity and deformation mechanisms of nanotwinned Cu[J]. SCRIPTA MATERIALIA,2018,154:54-59. |
APA | Yang, L. W.,Wang, C. Y.,Monclus, M. A.,Lu, L.,Molina-Aldareguia, J. M.,&Llorca, J..(2018).Influence of temperature on the strain rate sensitivity and deformation mechanisms of nanotwinned Cu.SCRIPTA MATERIALIA,154,54-59. |
MLA | Yang, L. W.,et al."Influence of temperature on the strain rate sensitivity and deformation mechanisms of nanotwinned Cu".SCRIPTA MATERIALIA 154(2018):54-59. |
Files in This Item: | There are no files associated with this item. |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment