| Evaluation of Fatigue Properties of CA6NM Martensite Stainless Steel Using Miniature Specimens | |
| Ma Yefei1,2; Song Zhuman2; Zhang Siqian1; Chen Lijia1; Zhang Guangping2 | |
| 通讯作者 | Zhang Guangping(gpzhang@imr.ac.cn) |
| 2018-10-11 | |
| 发表期刊 | ACTA METALLURGICA SINICA
 |
| ISSN | 0412-1961 |
| 卷号 | 54期号:10页码:1359-1367 |
| 摘要 | Since structural components in the nuclear power plant are unable to be disassembled during their in service process, it is an urgent and key problem how to quickly and non-destructively evaluate fatigue reliability of these key structural components by using miniature specimens. Fatigue properties of miniature specimens of CA6NM martensite stainless steel for impellers in the nuclear pump were obtained by using symmetrically bending fatigue loading and uniaxial tension-tension fatigue loading, respectively. A comparison of fatigue properties between the miniature specimens and bulk specimens was conducted to examine feasibility for the evaluation of fatigue reliability of the CA6NM steel using miniature specimens. The results show that tensile strength of the 40 mu m-thick CA6NM specimens is slightly higher than that of the bulk specimens, but elongation of the 40 mu m-thick specimens is lower than that of the bulk counterparts. In low cycle fatigue regime, fatigue strength of the 40 mu m-thick specimens subjected to uniaxial tension-tension fatigue loading is lower than that of the standard bulk counterparts. With decreasing the applied stress amplitude, the difference in fatigue properties gradually decreases, and the fatigue limit of the miniature specimen is close to that of the bulk counterparts. Fatigue strength of the 40 mu m-thick specimens subjected to bending fatigue loading is much higher than that subjected to uniaxial tension-tension fatigue loading, and also higher than that of the bulk counterparts. Fatigue strength of the miniature specimens is related to the loading mode. The difference in the fatigue mechanism between the miniature specimens and the bulk counterparts is discussed, and the feasibility to evaluate fatigue reliability of the steel using miniature specimens is addressed. |
| 关键词 | martensite stainless steel fatigue property miniature specimen size effect nuclear power material |
| 资助者 | National Natural Science Foundation of China |
| DOI | 10.11900/0412.1961.2018.00023 |
| 收录类别 | SCI |
| 语种 | 英语 |
| 资助项目 | National Natural Science Foundation of China[51771207] ; National Natural Science Foundation of China[51501117] |
| WOS研究方向 | Metallurgy & Metallurgical Engineering |
| WOS类目 | Metallurgy & Metallurgical Engineering |
| WOS记录号 | WOS:000446009000003 |
| 出版者 | SCIENCE PRESS |
| 引用统计 | |
| 文献类型 | 期刊论文 |
| 条目标识符 | http://ir.imr.ac.cn/handle/321006/129630 |
| 专题 | 中国科学院金属研究所 |
| 通讯作者 | Zhang Guangping |
| 作者单位 | 1.Shenyang Univ Technol, Sch Mat Sci & Engn, Shenyang 110870, Liaoning, Peoples R China 2.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Liaoning, Peoples R China |
| 推荐引用方式 GB/T 7714 | Ma Yefei,Song Zhuman,Zhang Siqian,et al. Evaluation of Fatigue Properties of CA6NM Martensite Stainless Steel Using Miniature Specimens[J]. ACTA METALLURGICA SINICA,2018,54(10):1359-1367. |
| APA | Ma Yefei,Song Zhuman,Zhang Siqian,Chen Lijia,&Zhang Guangping.(2018).Evaluation of Fatigue Properties of CA6NM Martensite Stainless Steel Using Miniature Specimens.ACTA METALLURGICA SINICA,54(10),1359-1367. |
| MLA | Ma Yefei,et al."Evaluation of Fatigue Properties of CA6NM Martensite Stainless Steel Using Miniature Specimens".ACTA METALLURGICA SINICA 54.10(2018):1359-1367. |
| 条目包含的文件 | 条目无相关文件。 | |||||
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。
修改评论