Examining Cu content contribution to changes in oxide layer formed on selective-laser-melted CoCrW alloys

doi:10.1016/j.apsusc.2018.09.082

IMR OpenIR

	Examining Cu content contribution to changes in oxide layer formed on selective-laser-melted CoCrW alloys
	Lu, Yanjin 1,2; Lin, Wenlie 1; Xie, Meiming 4; Xu, Wentao 1; Liu, Yujing 5; Lin, Junjie 1; Yu, Chun 1; Tang, Kanglai 4; Liu, Wenyuan 6; Yang, Ke 3; Lin, Jinxin 1,2
通讯作者	Liu, Yujing(yujing.liu@uwa.edu.au) ; Lin, Jinxin(Franklin@fjirsm.ac.cn)
	2019-01-15
发表期刊	APPLIED SURFACE SCIENCE
ISSN	0169-4332
卷号	464 页码:262-272
摘要	In this study, CoCrW alloys with different Cu contents (0, 2, 3, and 6 wt%) were prepared by selective laser melting for dental applications. The bonding strength between porcelain and the metal in porcelain-fused-to-metal dental restorations could be considerably affected by the quality of Cr oxide formed on CoCr-based alloys. Recent studies revealed that the Cu element could affect the oxidation behavior of austenitic steels. Therefore, it is essential to investigate the effect of the Cu element introduction on the oxidation performance of CoCrW alloys. The SEM and SPM indicated that the Cu element considerably affected the microstructures and the roughness of the oxide layer. XRD analysis showed that the oxide layer in CoCrW alloys was mainly composed of Cr2O3 and CoCr2O4, while trace amounts of CuO and Cu2O were found after the addition of the Cu element. The depth profiles obtained by XPS suggested that the Cu content in the film structure could affect the thickness of the Cr oxide regions, which revealed that the addition of the Cu element accelerated the oxidation of CoCrW alloys by promoting the diffusion of the O element into the inner layer. The three-point bending test indicated that the addition of Cu had a negative effect on the bonding strength between porcelain and the metal substrate.
关键词	Selective laser melting Antibacterial materials High-temperature oxidation CoCr alloys
资助者	National Natural Science Foundation of China ; National Key RD Plan
DOI	10.1016/j.apsusc.2018.09.082
收录类别	SCI
语种	英语
资助项目	National Natural Science Foundation of China[51801198] ; National Key RD Plan[2016YFC1100502]
WOS研究方向	Chemistry ; Materials Science ; Physics
WOS类目	Chemistry, Physical ; Materials Science, Coatings & Films ; Physics, Applied ; Physics, Condensed Matter
WOS记录号	WOS:000447744200031
出版者	ELSEVIER SCIENCE BV
引用统计	被引频次：18[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/129867
专题	中国科学院金属研究所
通讯作者	Liu, Yujing; Lin, Jinxin
作者单位	1.Chinese Acad Sci, Fujian Inst Res Struct Matter, 155 Yangqiao Rd West, Fuzhou, Fujian, Peoples R China 2.Univ Chinese Acad Sci, Beijing 100049, Peoples R China 3.Chinese Acad Sci, Inst Met Res, 72 Wenhua Rd, Shenyang, Liaoning, Peoples R China 4.Third Mil Med Univ, Southwest Hosp, Dept Orthoped Surg, Sports Med Ctr, Gaotanyan Str 30, Chongqing 400038, Peoples R China 5.Univ Western Australia, Sch Mech & Chem Engn, 35 Stirling Highway, Perth, WA 6009, Australia 6.Fuzhou Univ, Coll Zijin Ming, Fuzhou 350108, Fujian, Peoples R China
推荐引用方式 GB/T 7714	Lu, Yanjin,Lin, Wenlie,Xie, Meiming,et al. Examining Cu content contribution to changes in oxide layer formed on selective-laser-melted CoCrW alloys[J]. APPLIED SURFACE SCIENCE,2019,464:262-272.
APA	Lu, Yanjin.,Lin, Wenlie.,Xie, Meiming.,Xu, Wentao.,Liu, Yujing.,...&Lin, Jinxin.(2019).Examining Cu content contribution to changes in oxide layer formed on selective-laser-melted CoCrW alloys.APPLIED SURFACE SCIENCE,464,262-272.
MLA	Lu, Yanjin,et al."Examining Cu content contribution to changes in oxide layer formed on selective-laser-melted CoCrW alloys".APPLIED SURFACE SCIENCE 464(2019):262-272.