Precise Determination of Trace Hydrogen in SA508-3 Steel for Nuclear Reactor Pressure Vessels

doi:10.1166/sam.2018.3391

IMR OpenIR

	Precise Determination of Trace Hydrogen in SA508-3 Steel for Nuclear Reactor Pressure Vessels
	Hao, Luhan 1,2,3; Zhao, Wei 1,2; Peng, Yan 1; Sun, Mingyue 2; Li, Dianzhong 2; Liu, Hu 3,5; Wang, Xiaojing 3,6; Umar, Ahmad 4; Guo, Zhanhu 3
通讯作者	Hao, Luhan(lhhao@ysu.edu.cn) ; Peng, Yan(pengyan@ysu.edu.cn) ; Sun, Mingyue(mysun@imr.ac.cn) ; Guo, Zhanhu(zguo10@utk.edu)
	2018-11-01
发表期刊	SCIENCE OF ADVANCED MATERIALS
ISSN	1947-2935
卷号	10 期号:11 页码:1651-1657
摘要	Hydrogen is one of the most detrimental elements in steel, therefore it must be strictly controlled, especially in the ferritic steel SA508-3 used in nuclear power plant, due to its persistent exposure to irradiated environment. However, the tests of hydrogen concentration in current industry have provided usually unstable and sparse results, which seriously perplexes practitioners. In the present study, tested hydrogen contents of a series of specimens with different machining and cleaning conditions were compared. Experimental and theoretical investigations showed that differences in surface contamination can significantly influence hydrogen analysis result, and the measured hydrogen content is the combination of the inherent hydrogen in the steel and the adsorbed hydrogen on the surface. Time-of-Flight Secondary Ion Mass Spectrometry (TOF-SIM) was then used to determine the hydrogen concentration gradient from the surface to the base of the SA508-3 steel, with the aim of confirming the existence of surface hydrogen. The result demonstrated that, if the specimen surface is in a rough and polluted state, the count intensity of hydrogen on the specimen surface, which qualitatively reflects the content of surface hydrogen can be more than 4 times that in the base of the specimen. Finally, on the basis of the analysis of tested results, a pre-treatment method combining a certain machining speed and ultrasonic cleaning is proposed in order to obtain a stable and reliable hydrogen analysis result. Furthermore, a mass of practical industry data is used to confirm the effectiveness of this pre-treatment method.
关键词	Determination Trace Hydrogen SA508-3 Steel Nuclear Reactor Pressure Vessels
资助者	Natural Science Foundation of Hebei Province of China
DOI	10.1166/sam.2018.3391
收录类别	SCI
语种	英语
资助项目	Natural Science Foundation of Hebei Province of China[E2016203485]
WOS研究方向	Science & Technology - Other Topics ; Materials Science ; Physics
WOS类目	Nanoscience & Nanotechnology ; Materials Science, Multidisciplinary ; Physics, Applied
WOS记录号	WOS:000449470400016
出版者	AMER SCIENTIFIC PUBLISHERS
引用统计	被引频次：6[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/130252
专题	中国科学院金属研究所
通讯作者	Hao, Luhan; Peng, Yan; Sun, Mingyue; Guo, Zhanhu
作者单位	1.Yanshan Univ, Natl Engn Res Ctr Equipment & Technol Cold Strip, Qinhuangdao 066004, Peoples R China 2.Chinese Acad Sci, Shenyang Natl Lab Mat Sci, Inst Met Res, 72 Wenhua Rd, Shenyang 110016, Liaoning, Peoples R China 3.Univ Tennessee, Dept Chem & Biomol Engn, Knoxville, TN 37996 USA 4.Najran Univ, Fac Sci & Arts, Dept Chem, Promising Ctr Sensors & Elect Devices, Najran 11001, Saudi Arabia 5.Zhengzhou Univ, Natl Engn Res Ctr Adv Polymer Proc Technol, Zhengzhou 450002, Henan, Peoples R China 6.Jiangsu Univ Sci & Technol, Sch Mat Sci & Engn, Zhenjiang 212003, Jiangsu, Peoples R China
推荐引用方式 GB/T 7714	Hao, Luhan,Zhao, Wei,Peng, Yan,et al. Precise Determination of Trace Hydrogen in SA508-3 Steel for Nuclear Reactor Pressure Vessels[J]. SCIENCE OF ADVANCED MATERIALS,2018,10(11):1651-1657.
APA	Hao, Luhan.,Zhao, Wei.,Peng, Yan.,Sun, Mingyue.,Li, Dianzhong.,...&Guo, Zhanhu.(2018).Precise Determination of Trace Hydrogen in SA508-3 Steel for Nuclear Reactor Pressure Vessels.SCIENCE OF ADVANCED MATERIALS,10(11),1651-1657.
MLA	Hao, Luhan,et al."Precise Determination of Trace Hydrogen in SA508-3 Steel for Nuclear Reactor Pressure Vessels".SCIENCE OF ADVANCED MATERIALS 10.11(2018):1651-1657.