A high strength low alloy steel fabricated by direct laser deposition

doi:10.1016/j.vacuum.2018.12.030

IMR OpenIR

	A high strength low alloy steel fabricated by direct laser deposition
	Wang, Qiang 1,2,3,5; Zhang, Song 3; Zhang, Chunhua 3; Wang, Jianqiang 4; Shahzad, M. Babar 4; Chen, Haitao 5; Chen, Jiang 5
通讯作者	Wang, Qiang(mfqwang@163.com) ; Zhang, Song(songzhang_sy@163.com)
	2019-03-01
发表期刊	VACUUM
ISSN	0042-207X
卷号	161 页码:225-231
摘要	Direct laser metal deposition (DLMD) can produce near net shape parts by layer-by-layer deposition of metallic powders. In the present study, DLMD was used to fabricate a high strength low alloy (HSLA) steel. The characteristics of the microstructure and mechanical properties of the as-built HSLA were characterized using optical microscopy, electron back-scatter diffraction (EBSD), transmission electron microscopy, and tensile test machine respectively. It was found that the optimized parameters ensured a high quality of the built samples. The as-built HSLA steel was mainly composed of alpha-Fe (Ferrite) phase with a trace of C6Cr23 and Fe3C phases. TEM result proved the formation of martensite phase. Most grain boundaries misorientation angles were low-angle grain boundary which elevated the strengthening effect. Tensile strength, yield strength, and elongation of the as deposited HSLA were comparable with other high-performance alloy steels. The present results show the potential of DLMD for the fabrication of a HSLA with excellent mechanical properties.
关键词	High strength low alloy steel Direct laser metal deposition Phase distribution EBSD Mechanical properties
资助者	National Key Research and Development Program of China ; Key Research Project from Science and Technology Commission of Liaoning Province ; Shenyang Science and Technology
DOI	10.1016/j.vacuum.2018.12.030
收录类别	SCI
语种	英语
资助项目	National Key Research and Development Program of China[2016YFB1100204] ; Key Research Project from Science and Technology Commission of Liaoning Province[2017106036] ; Shenyang Science and Technology[18-004-1-16] ; Shenyang Science and Technology[Z18-5-012] ; Shenyang Science and Technology[18-014-4-36] ; Shenyang Science and Technology[18-201-0-02]
WOS研究方向	Materials Science ; Physics
WOS类目	Materials Science, Multidisciplinary ; Physics, Applied
WOS记录号	WOS:000458591100031
出版者	PERGAMON-ELSEVIER SCIENCE LTD
引用统计	被引频次：39[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/131897
专题	中国科学院金属研究所
通讯作者	Wang, Qiang; Zhang, Song
作者单位	1.China Med Univ, Sch Stomatol, Shenyang, Liaoning, Peoples R China 2.China Med Univ, Sch Stomatol, Dept Cent Lab, Shenyang, Liaoning, Peoples R China 3.Shenyang Univ Technol, Sch Mat Sci & Engn, Shenyang 110870, Liaoning, Peoples R China 4.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Liaoning, Peoples R China 5.Shenyang Dalu Laser Grp Co Ltd, Shenyang 110002, Liaoning, Peoples R China
推荐引用方式 GB/T 7714	Wang, Qiang,Zhang, Song,Zhang, Chunhua,et al. A high strength low alloy steel fabricated by direct laser deposition[J]. VACUUM,2019,161:225-231.
APA	Wang, Qiang.,Zhang, Song.,Zhang, Chunhua.,Wang, Jianqiang.,Shahzad, M. Babar.,...&Chen, Jiang.(2019).A high strength low alloy steel fabricated by direct laser deposition.VACUUM,161,225-231.
MLA	Wang, Qiang,et al."A high strength low alloy steel fabricated by direct laser deposition".VACUUM 161(2019):225-231.