Achieving strength-ductility synergy in cold spray additively manufactured Al/B4C composites through a hybrid post-deposition treatment

doi:10.1016/j.jmst.2018.12.022

IMR OpenIR

	Achieving strength-ductility synergy in cold spray additively manufactured Al/B4C composites through a hybrid post-deposition treatment
	Tariq, Naeem Ul Haq 1,2,3; Gyansah, Lawrence 1,2; Qiu, Xiang 1,4; Jia, Chunni 1,4; Bin Awais, Hasan 3; Zheng, Chengwu 1; Du, Hao 1; Wang, Jiqiang 1; Xiong, Tianying 1
通讯作者	Wang, Jiqiang(jqwang11s@imr.ac.cn) ; Xiong, Tianying(tyxiong@imr.ac.cn)
	2019-06-01
发表期刊	JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
ISSN	1005-0302
卷号	35 期号:6 页码:1053-1063
摘要	Cold spray additive manufacturing (CSAM) provides a potential solid state manufacturing route to fabricate variety of aluminum matrix composites (AMCs) with reduced possibility of undesired chemical reactions and residual thermal stresses. This study presents a hybrid (i.e. hot compression + hot rolling) post-deposition treatment to reinvigorate the mechanical properties of cold spray additively manufactured Al/B4C composites. The as-deposited samples were initially subjected to 30% thickness reduction via hot compression treatment at similar to 500 degrees C followed by a hot rolling treatment with 40% thickness reduction in 2 passes. Electron backscatter diffraction (EBSD) and high resolution transmission electron microscopy (HRTEM) results revealed that after hybrid post-deposition treatment (involving 70% accumulative thickness reduction), the aluminum grains in the matrix were extensively refined due to simultaneous operation of continuous dynamic recrystallization (CDRX) and geometric dynamic recrystallization (GDRX). Furthermore, interfacial defects were remarkably reduced while the nature of Al/Al and Al/B4C interfacial bonding was changed from sheer mechanical interlocking to metallurgical bonding which facilitated efficient transference of applied load to uniformly dispersed bimodal B4C particles. As a result, ultimate tensile strength (UTS) and elongation (EL) of the as-deposited sample were simultaneously improved from similar to 37 to 185 MPa and similar to 0.3% to 6.2%, respectively. (C) 2019 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.
关键词	Cold spray additive manufacturing Post deposition treatments Al/B4C composites Dynamic recrystallization Mechanical propertiesa
资助者	National Natural Science Foundation of China
DOI	10.1016/j.jmst.2018.12.022
收录类别	SCI
语种	英语
资助项目	National Natural Science Foundation of China[51671205]
WOS研究方向	Materials Science ; Metallurgy & Metallurgical Engineering
WOS类目	Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering
WOS记录号	WOS:000464017000013
出版者	JOURNAL MATER SCI TECHNOL
引用统计	被引频次：48[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/132930
专题	中国科学院金属研究所
通讯作者	Wang, Jiqiang; Xiong, Tianying
作者单位	1.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Liaoning, Peoples R China 2.Univ Chinese Acad Sci, Beijing 100049, Peoples R China 3.Pakistan Inst Engn & Appl Sci, Dept Met & Mat Engn, Islamabad, Pakistan 4.Univ Sci & Technol China, Sch Mat Sci & Engn, Shenyang 110016, Liaoning, Peoples R China
推荐引用方式 GB/T 7714	Tariq, Naeem Ul Haq,Gyansah, Lawrence,Qiu, Xiang,et al. Achieving strength-ductility synergy in cold spray additively manufactured Al/B4C composites through a hybrid post-deposition treatment[J]. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,2019,35(6):1053-1063.
APA	Tariq, Naeem Ul Haq.,Gyansah, Lawrence.,Qiu, Xiang.,Jia, Chunni.,Bin Awais, Hasan.,...&Xiong, Tianying.(2019).Achieving strength-ductility synergy in cold spray additively manufactured Al/B4C composites through a hybrid post-deposition treatment.JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,35(6),1053-1063.
MLA	Tariq, Naeem Ul Haq,et al."Achieving strength-ductility synergy in cold spray additively manufactured Al/B4C composites through a hybrid post-deposition treatment".JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY 35.6(2019):1053-1063.