Fabrication of aligned carbon-fiber/polymer TIMs using electrostatic flocking method | |
Yu, Zifeng1,2; Wei, Song1,2; Guo, Jingdong1,2 | |
Corresponding Author | Guo, Jingdong(jdguo@imr.ac.cn) |
2019-06-01 | |
Source Publication | JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
![]() |
ISSN | 0957-4522 |
Volume | 30Issue:11Pages:10233-10243 |
Abstract | Directional assembly of anisotropic appearance filler in the composite is an effective way to obtain higher thermal conductivity thermal interface materials (TIMs). In this study, vertically aligned carbon fiber (VACF) scaffold reinforced polymer TIMs were fabricated using electrostatic flocking method, in which the aligned carbon fibers formed efficient heat conduction paths through the polymer matrix. By using high thermal conductivity mesophase pitch-based carbon fibers (mPCF) as filler, the maximum through plane thermal conductivity of the TIM with 13.4 wt% mPCF could reach up to 15.3W/(mK), 60.2 times higher than that of the matrix, and the TIM also performed excellent flexibility. The influence of electrostatic flocking parameters on flocking effect was investigated. It is found that the electric field strength and the conductivity of fibers were the major factors to affect the vertical ratio of the mPCFs, and proper panels distance and fiber length were needed to acquire better flocking effect. In addition, the charging regular and the motion mechanism of fibers in electrostatic field were also discussed. |
Funding Organization | Ministry of Science and Technology of the People's Republic of China |
DOI | 10.1007/s10854-019-01360-7 |
Indexed By | SCI |
Language | 英语 |
Funding Project | Ministry of Science and Technology of the People's Republic of China[2013YQ120355] |
WOS Research Area | Engineering ; Materials Science ; Physics |
WOS Subject | Engineering, Electrical & Electronic ; Materials Science, Multidisciplinary ; Physics, Applied ; Physics, Condensed Matter |
WOS ID | WOS:000469399700020 |
Publisher | SPRINGER |
Citation statistics | |
Document Type | 期刊论文 |
Identifier | http://ir.imr.ac.cn/handle/321006/133702 |
Collection | 中国科学院金属研究所 |
Corresponding Author | Guo, Jingdong |
Affiliation | 1.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Liaoning, Peoples R China 2.Univ Sci & Technol China, Sch Mat Sci & Engn, Hefei 230026, Anhui, Peoples R China |
Recommended Citation GB/T 7714 | Yu, Zifeng,Wei, Song,Guo, Jingdong. Fabrication of aligned carbon-fiber/polymer TIMs using electrostatic flocking method[J]. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS,2019,30(11):10233-10243. |
APA | Yu, Zifeng,Wei, Song,&Guo, Jingdong.(2019).Fabrication of aligned carbon-fiber/polymer TIMs using electrostatic flocking method.JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS,30(11),10233-10243. |
MLA | Yu, Zifeng,et al."Fabrication of aligned carbon-fiber/polymer TIMs using electrostatic flocking method".JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS 30.11(2019):10233-10243. |
Files in This Item: | There are no files associated with this item. |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment