Deformation characteristics in hydro-mechanical forming process of thin-walled hollow component with large deformation: experimentation and finite element modeling

doi:10.1007/s00170-019-04346-1

IMR OpenIR

	Deformation characteristics in hydro-mechanical forming process of thin-walled hollow component with large deformation: experimentation and finite element modeling
	Xia, Liang-Liang 1,2; Xu, Yong 1,2; Abd El-Aty, Ali 1; Zhang, Shi-Hong 1,2; Nielsen, Karl Brian 3; Li, Jing-Ming 4
通讯作者	Xu, Yong(yxu@imr.ac.cn)
	2019-10-01
发表期刊	INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
ISSN	0268-3768
卷号	104 期号:9-12 页码:4705-4714
摘要	The automobile exhaust manifold regularly has a multi-valved shape that used to be formed by the combination of stamping and welding. The current study intended to investigate and develop a tube hydro-mechanical forming (THMF) process to form an integral automobile exhaust manifold that has the characters of large deformation and small corner. It included three stages such as pre-forming stage, die-forming stage, and calibration stage. In addition, the non-feasibility of one-step hydroforming process was proved by FE modeling and experimental for the target component. An optimal loading path was obtained through the principle of dichotomy for pre-forming stage and die-forming stage, corresponding to the maximum thinning ratio of 19.7% and 13.27% respectively. The variation of stress and strain states were analyzed for the whole process. As a consequent, the thickness distribution exhibited a V-shaped along axial direction at each stage, while a fluctuated distribution after die-forming was presented along radial direction in the multi-valved area. For the final component, a maximum thinning ratio of 28.53% and the large deformation above 60% obtained from FE modeling kept a reasonable agreement with that achieved from experiments. It showed that THMF has advantages of not only decreasing the internal pressure but also improving the formability of tube.
关键词	Tube hydro-mechanical forming Thin-walled hollow component Large deformation Hydroforming FE modeling
资助者	National Natural Science Foundation of China ; Natural Science Foundation of Liaoning Province of China
DOI	10.1007/s00170-019-04346-1
收录类别	SCI
语种	英语
资助项目	National Natural Science Foundation of China[51875548] ; Natural Science Foundation of Liaoning Province of China[20180550851]
WOS研究方向	Automation & Control Systems ; Engineering
WOS类目	Automation & Control Systems ; Engineering, Manufacturing
WOS记录号	WOS:000500220700110
出版者	SPRINGER LONDON LTD
引用统计	被引频次：12[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/136015
专题	中国科学院金属研究所
通讯作者	Xu, Yong
作者单位	1.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Liaoning, Peoples R China 2.Univ Sci & Technol China, Sch Mat Sci & Engn, Hefei 230026, Anhui, Peoples R China 3.Aalborg Univ, Dept Mat & Prod, Aalborg, Denmark 4.Henan Xingdi Forging Equipment Mfg Co Ltd, Xinxiang 453600, Henan, Peoples R China
推荐引用方式 GB/T 7714	Xia, Liang-Liang,Xu, Yong,Abd El-Aty, Ali,et al. Deformation characteristics in hydro-mechanical forming process of thin-walled hollow component with large deformation: experimentation and finite element modeling[J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2019,104(9-12):4705-4714.
APA	Xia, Liang-Liang,Xu, Yong,Abd El-Aty, Ali,Zhang, Shi-Hong,Nielsen, Karl Brian,&Li, Jing-Ming.(2019).Deformation characteristics in hydro-mechanical forming process of thin-walled hollow component with large deformation: experimentation and finite element modeling.INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,104(9-12),4705-4714.
MLA	Xia, Liang-Liang,et al."Deformation characteristics in hydro-mechanical forming process of thin-walled hollow component with large deformation: experimentation and finite element modeling".INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY 104.9-12(2019):4705-4714.