Enhancing high-temperature strength of B4C-6061Al neutron absorber material by in-situ Mg(Al)B-2

doi:10.1016/j.jnucmat.2019.151788

IMR OpenIR

	Enhancing high-temperature strength of B4C-6061Al neutron absorber material by in-situ Mg(Al)B-2
	Zan, Y. N.1,3; Zhang, Q.1,3; Zhou, Y. T.1; Wang, Q. Z.2; Xiao, B. L.1; Ma, Z. Y.1
通讯作者	Zhou, Y. T.(ytzhou@imr.ac.cn) ; Ma, Z. Y.(zyma@imr.ac.cn)
	2019-12-01
发表期刊	JOURNAL OF NUCLEAR MATERIALS
ISSN	0022-3115
卷号	526 页码:8
摘要	The industrial development of dry storage method of spent nuclear fuels strongly requires the low-cost B4C-Al neutron absorber materials (NAMs) with high strength and high stability at elevated temperatures. In the present work, the B4C-6061Al composites were fabricated by powder metallurgy method with different hot-pressing temperatures. Microscopic analysis showed that as hot-pressing temperatures increased from 560 degrees C to 630 degrees C, the interfacial reactions became severe, resulting in the formation of Al3BC and Mg(Al)B-2 compounds. The mechanical properties of the composites were enhanced by the interfacial reactions, specifically, the tensile strength of the sample hot-pressed at 630 degrees C was 40-59% higher than that at 560 degrees C at testing temperatures from room temperature up to 350 degrees C. Moreover, the high-temperature-pressed sample maintained the invariant strength level after suffering annealing at 400 degrees C for 8000 h. Characterization of the fractured composite indicated that the Mg(Al)B2 nanorods which effectively impeded the dislocation movement and grain boundary sliding provided a significant contribution to the composite strength. (C) 2019 Elsevier B.V. All rights reserved.
关键词	B4C-Al composite In-situ reinforcement High-temperature strength Thermal stability TEM
资助者	National Natural Science Foundation of China (NSFC) ; NSF of Liaoning Province ; Innovation Fund of IMR
DOI	10.1016/j.jnucmat.2019.151788
收录类别	SCI
语种	英语
资助项目	National Natural Science Foundation of China (NSFC)[U1508216] ; National Natural Science Foundation of China (NSFC)[51501195] ; National Natural Science Foundation of China (NSFC)[51771194] ; NSF of Liaoning Province[20180551101] ; Innovation Fund of IMR[2017-PY10]
WOS研究方向	Materials Science ; Nuclear Science & Technology
WOS类目	Materials Science, Multidisciplinary ; Nuclear Science & Technology
WOS记录号	WOS:000500777900017
出版者	ELSEVIER
引用统计	被引频次：26[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/136184
专题	中国科学院金属研究所
通讯作者	Zhou, Y. T.; Ma, Z. Y.
作者单位	1.Chinese Acad Sci, Inst Met Res, Shenyang Natl Lab Mat Sci, 72 Wenhua Rd, Shenyang 110016, Liaoning, Peoples R China 2.Chinese Acad Sci, Inst Met Res, Key Lab Nucl Mat & Safety Assessment, 72 Wenhua Rd, Shenyang 110016, Liaoning, Peoples R China 3.Univ Sci & Technol China, Sch Mat Sci & Engn, 72 Wenhua Rd, Shenyang 110016, Liaoning, Peoples R China
推荐引用方式 GB/T 7714	Zan, Y. N.,Zhang, Q.,Zhou, Y. T.,et al. Enhancing high-temperature strength of B4C-6061Al neutron absorber material by in-situ Mg(Al)B-2[J]. JOURNAL OF NUCLEAR MATERIALS,2019,526:8.
APA	Zan, Y. N.,Zhang, Q.,Zhou, Y. T.,Wang, Q. Z.,Xiao, B. L.,&Ma, Z. Y..(2019).Enhancing high-temperature strength of B4C-6061Al neutron absorber material by in-situ Mg(Al)B-2.JOURNAL OF NUCLEAR MATERIALS,526,8.
MLA	Zan, Y. N.,et al."Enhancing high-temperature strength of B4C-6061Al neutron absorber material by in-situ Mg(Al)B-2".JOURNAL OF NUCLEAR MATERIALS 526(2019):8.