Microstructural evolutions and mechanical characteristics of Ti/steel clad plates fabricated through cold spray additive manufacturing followed by hot-rolling and annealing

doi:10.1016/j.matdes.2019.108249

IMR OpenIR

	Microstructural evolutions and mechanical characteristics of Ti/steel clad plates fabricated through cold spray additive manufacturing followed by hot-rolling and annealing
	Zhao, Zhipo 1,2; Tariq, Naeem ul Haq 3; Tang, Junrong 1,2; Jia, Cunlei 1,2; Qiu, Xiang 1,2; Ren, Yupeng 1,2; Liu, Hanhui 1,2; Shen, Yanfang 1; Du, Hao 1; Cui, Xinyu 1; Wang, Jiqiang 1; Xiong, Tianying 1
通讯作者	Wang, Jiqiang(jqwang11s@imr.ac.cn) ; Xiong, Tianying(tyxiong@imr.ac.cn)
	2020-01-05
发表期刊	MATERIALS & DESIGN
ISSN	0264-1275
卷号	185 页码:11
摘要	An innovative approach is designed to fabricate Ti/steel clad plates. Instead of using Ti sheets, pure Ti powder was initially deposited on steel plates using cold spray additive manufacturing (CSAM). Then well bonded Ti/steel clad plates were obtained through hot-rolling and annealing operations. The mechanical properties of the clad plates at different processing stages were evaluated by performing a series of tensile tests and shear tests. It was revealed that the Ti/steel clad plates had excellent shear strength (280 Mpa), ultimate tensile strength (UTS, 564 Mpa) and decent elongation (EL,18%). Micro structural investigation of the specimens was performed by scanning electron microscopy (SEM), electron backscattered diffraction (EBSD) and transmission electron microscopy (TEM). It was revealed that cold spraying offers good pre-bonding of Ti with the steel plate thereby suppressing cracking and oxidation at the interface. Hot-rolling treatment repaired the pores/defects in the as-sprayed Ti coating and resulted in metallurgical bonding between Ti particles as well as Ti/steel interface, which remarkably improved the strength of the material. High dislocation density in the clad plates were further eliminated by the annealing treatment through recovery, recrystallization and grain growth mechanisms, which greatly improved the toughness of the samples. (C) 2019 The Authors. Published by Elsevier Ltd.
关键词	Ti/steel clad plate Cold spray additive manufacturing (CSAM) Heat treatment Mechanical properties Microstructure
资助者	National Natural Science Foundation of China
DOI	10.1016/j.matdes.2019.108249
收录类别	SCI
语种	英语
资助项目	National Natural Science Foundation of China[51671205]
WOS研究方向	Materials Science
WOS类目	Materials Science, Multidisciplinary
WOS记录号	WOS:000504639400028
出版者	ELSEVIER SCI LTD
引用统计	被引频次：50[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/136261
专题	中国科学院金属研究所
通讯作者	Wang, Jiqiang; Xiong, Tianying
作者单位	1.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Liaoning, Peoples R China 2.Univ Sci & Technol China, Sch Mat Sci & Engn, Shenyang 110016, Liaoning, Peoples R China 3.Pakistan Inst Engn & Appl Sci, Dept Met & Mat Engn, Islamabad, Pakistan
推荐引用方式 GB/T 7714	Zhao, Zhipo,Tariq, Naeem ul Haq,Tang, Junrong,et al. Microstructural evolutions and mechanical characteristics of Ti/steel clad plates fabricated through cold spray additive manufacturing followed by hot-rolling and annealing[J]. MATERIALS & DESIGN,2020,185:11.
APA	Zhao, Zhipo.,Tariq, Naeem ul Haq.,Tang, Junrong.,Jia, Cunlei.,Qiu, Xiang.,...&Xiong, Tianying.(2020).Microstructural evolutions and mechanical characteristics of Ti/steel clad plates fabricated through cold spray additive manufacturing followed by hot-rolling and annealing.MATERIALS & DESIGN,185,11.
MLA	Zhao, Zhipo,et al."Microstructural evolutions and mechanical characteristics of Ti/steel clad plates fabricated through cold spray additive manufacturing followed by hot-rolling and annealing".MATERIALS & DESIGN 185(2020):11.