| Anisotropic yielding stress of 2198 Al-Li alloy sheet and mechanisms | |
| Zhao Tian-Zhang1; Jin Long1; Xu Yong2; Zhang Shi-Hong2 | |
| Corresponding Author | Zhao Tian-Zhang(tzzhao@alum.imr.ac.cn) |
| 2020-01-13 | |
| Source Publication | MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
 |
| ISSN | 0921-5093 |
| Volume | 771Pages:7 |
| Abstract | The anisotropic mechanical behaviors of 2198 Al-Li alloy sheet under different heat treatments, including new quenching, natural ageing and artificial ageing, were systematically assessed via uniaxial tensile tests in three different directions: rolling direction (RD), 45 degrees and transverse direction (TD). It's found that the anisotropy of yielding stress after quenching and natural ageing is similar, mainly owing to the same crystallographic texture. The delta' participate generated during natural ageing has no influence on the anisotropy but increases the strength homogeneously. By contrast, 2198 Al-Li alloy after artificial ageing exhibits a different anisotropy of the yielding stress due to the inhomogeneous distribution of T-1 participate on four different variants of {111} plane. It is mainly caused by the inhomogeneous activation of dislocation glide during the pre-deformation, which has been verified by the calculation result via the visco-plastic self-consistent model. A new factor, T, has been proposed to consider the contribution of T-1 on the anisotropic yielding stress. In addition, a new analytical model has been established to predict the anisotropic yielding stress of 2198 AL-Li alloy sheet under different heat treatments and with different pre-deformation, which agrees well with the experimental results. |
| Keyword | Al-Li alloy Anisotropy Crystallographic texture Precipitate strengthening |
| Funding Organization | National Natural Science Foundation of China |
| DOI | 10.1016/j.msea.2019.138572 |
| Indexed By | SCI |
| Language | 英语 |
| Funding Project | National Natural Science Foundation of China[:51605310] ; National Natural Science Foundation of China[51875548] |
| WOS Research Area | Science & Technology - Other Topics ; Materials Science ; Metallurgy & Metallurgical Engineering |
| WOS Subject | Nanoscience & Nanotechnology ; Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering |
| WOS ID | WOS:000503324700005 |
| Publisher | ELSEVIER SCIENCE SA |
| Citation statistics | |
| Document Type | 期刊论文 |
| Identifier | http://ir.imr.ac.cn/handle/321006/136392 |
| Collection | 中国科学院金属研究所 |
| Corresponding Author | Zhao Tian-Zhang |
| Affiliation | 1.Shenyang Aerosp Univ, Shenyang 110136, Liaoning, Peoples R China 2.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Liaoning, Peoples R China |
| Recommended Citation GB/T 7714 | Zhao Tian-Zhang,Jin Long,Xu Yong,et al. Anisotropic yielding stress of 2198 Al-Li alloy sheet and mechanisms[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2020,771:7. |
| APA | Zhao Tian-Zhang,Jin Long,Xu Yong,&Zhang Shi-Hong.(2020).Anisotropic yielding stress of 2198 Al-Li alloy sheet and mechanisms.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,771,7. |
| MLA | Zhao Tian-Zhang,et al."Anisotropic yielding stress of 2198 Al-Li alloy sheet and mechanisms".MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 771(2020):7. |
| Files in This Item: | There are no files associated with this item. | |||||
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment