Age hardening responses of as-extruded Mg-2.5Sn-1.5Ca alloys with a wide range of Al concentration

doi:10.1016/j.jmst.2019.06.025

IMR OpenIR

	Age hardening responses of as-extruded Mg-2.5Sn-1.5Ca alloys with a wide range of Al concentration
	Huang, Qiuyan 1; Liu, Yang 1; Zhang, Aiyue 2,3; Jiang, Haoxin 2,3; Pan, Hucheng 2,3; Feng, Xiaohui 1; Yang, Changlin 4; Luo, Tianjiao 1; Li, Yingju 1; Yang, Yuansheng 1
通讯作者	Pan, Hucheng(panhc@atm.neu.edu.cn) ; Yang, Yuansheng(ysyang@imr.ac.cn)
	2020-02-01
发表期刊	JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
ISSN	1005-0302
卷号	38 页码:39-46
摘要	This article aims to explore the age hardening responses of both as-extruded and as-aged Mg-2.5Sn-1.5Ca-xAl alloys (x= 2.0, 4.0 and 9.0 wt%, termed TXA322, TXA324 and TXA329, respectively) through microstructural and mechanical characterization. Results indicate that grain size of as-extruded TXA322, TXA324 and TXA329 alloys were similar to 16 mu m, similar to 10 mu m and similar to 12 mu m, respectively. A number of and dislocations were observed in all the as-extruded samples. Guinier - Preston (GP) zones were evidently identified in TXA322 alloy, while only a small number of Mg17Al12 phases existed in both TXA324 and TXA329 alloys. An aging treatment facilitated the precipitation of a high number density of GP zones within the matrix of TXA322 alloy. In contrast, no obvious nano-precipitates were in as-aged TXA324 alloy. Numerous nano-Mg17Al12 phases were formed through a following aging treatment in TXA329 alloy. In terms of mechanical properties, it is apparent that an increment in ultimate tensile strength of similar to 46 MPa and similar to 40 MPa was yielded in peak-aged TXA322 and TXA329 alloys, while no obvious variations in UTS were present in peak-aged TXA324 alloy, in comparison with the as-extruded counterparts. (C) 2019 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.
关键词	Magnesium alloys Age hardening Precipitations Dislocations Mechanical properties
资助者	National Key Research and Development Program of China ; National Natural Science Foundation of China ; Fundamental Research Funds for the Central Universities ; Fund of the state Key Laboratory of Solidification Processing in NPU
DOI	10.1016/j.jmst.2019.06.025
收录类别	SCI
语种	英语
资助项目	National Key Research and Development Program of China[2016YFB0301105] ; National Key Research and Development Program of China[2016YFB0701200] ; National Natural Science Foundation of China[51701211] ; National Natural Science Foundation of China[51971053] ; National Natural Science Foundation of China[U1610253] ; Fundamental Research Funds for the Central Universities[N170204011] ; Fund of the state Key Laboratory of Solidification Processing in NPU[SKLSP201920]
WOS研究方向	Materials Science ; Metallurgy & Metallurgical Engineering
WOS类目	Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering
WOS记录号	WOS:000503164100005
出版者	JOURNAL MATER SCI TECHNOL
引用统计	被引频次：23[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/136569
专题	中国科学院金属研究所
通讯作者	Pan, Hucheng; Yang, Yuansheng
作者单位	1.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Liaoning, Peoples R China 2.Northeastern Univ, Sch Mat Sci & Engn, Key Lab Anisotropy & Texture Mat MOE, Shenyang 110819, Liaoning, Peoples R China 3.Northeastern Univ, Res Ctr Metall Wires, Shenyang 110819, Liaoning, Peoples R China 4.Northwestern Polytech Univ, State Key Lab Solidificat Proc, Xian 710072, Shaanxi, Peoples R China
推荐引用方式 GB/T 7714	Huang, Qiuyan,Liu, Yang,Zhang, Aiyue,et al. Age hardening responses of as-extruded Mg-2.5Sn-1.5Ca alloys with a wide range of Al concentration[J]. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,2020,38:39-46.
APA	Huang, Qiuyan.,Liu, Yang.,Zhang, Aiyue.,Jiang, Haoxin.,Pan, Hucheng.,...&Yang, Yuansheng.(2020).Age hardening responses of as-extruded Mg-2.5Sn-1.5Ca alloys with a wide range of Al concentration.JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,38,39-46.
MLA	Huang, Qiuyan,et al."Age hardening responses of as-extruded Mg-2.5Sn-1.5Ca alloys with a wide range of Al concentration".JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY 38(2020):39-46.