A modified thin-walled tube push-bending process with polyurethane mandrel

doi:10.1007/s00170-019-04827-3

IMR OpenIR

	A modified thin-walled tube push-bending process with polyurethane mandrel
	Jiang, Weihao 1,2; Xie, Wenlong 1,2; Song, Hongwu 1; Lazarescu, Lucian 3; Zhang, Shihong 1; Banabic, Dorel 3
通讯作者	Song, Hongwu(hwsong@imr.ac.cn)
	2020
发表期刊	INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
ISSN	0268-3768
卷号	106 期号:5-6 页码:2509-2521
摘要	Thin-walled (D/t > 30; D, initial outer diameter; t, initial wall thickness) bent tubes with large diameter (D > 100 mm) and small bending radius (R/D < 3; R, centerline radius) are difficult to form integrally using traditional bending methods. In this paper, using a novel loading method, a modified push-bending (MPB) process with polyurethane as mandrel was developed. A stainless steel bent tube with extreme geometrical specification (D = 144 mm, D/t = 72, and R/D = 1.94) was formed integrally by MPB. Based on analytical and finite element (FE) method, the internal pressure, i.e., contact pressure between polyurethane and tube (CPPT) were investigated. The results show that the CPPT decreases linearly from the back end to the front end of polyurethane rod and increases with smaller mu(1) (the coefficient of friction between polyurethane and tube) and larger L (the center axis length of polyurethane rod), and the increase of CPPT is helpful to decrease the ovality of the bent tube.
关键词	Thin-walled tube Push-bending Internal pressure Polyurethane Finite element method
DOI	10.1007/s00170-019-04827-3
收录类别	SCI
语种	英语
WOS研究方向	Automation & Control Systems ; Engineering
WOS类目	Automation & Control Systems ; Engineering, Manufacturing
WOS记录号	WOS:000513183100060
出版者	SPRINGER LONDON LTD
引用统计	被引频次：17[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/137093
专题	中国科学院金属研究所
通讯作者	Song, Hongwu
作者单位	1.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China 2.Univ Sci & Technol China, Sch Mat Sci & Engn, Shenyang 110016, Peoples R China 3.Tech Univ Cluj Napoca, Dept Mfg Engn, Cluj Napoca 400641, Romania
推荐引用方式 GB/T 7714	Jiang, Weihao,Xie, Wenlong,Song, Hongwu,et al. A modified thin-walled tube push-bending process with polyurethane mandrel[J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2020,106(5-6):2509-2521.
APA	Jiang, Weihao,Xie, Wenlong,Song, Hongwu,Lazarescu, Lucian,Zhang, Shihong,&Banabic, Dorel.(2020).A modified thin-walled tube push-bending process with polyurethane mandrel.INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,106(5-6),2509-2521.
MLA	Jiang, Weihao,et al."A modified thin-walled tube push-bending process with polyurethane mandrel".INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY 106.5-6(2020):2509-2521.