IMR OpenIR
A hybrid approach to improve microstructure and mechanical properties of cold spray additively manufactured A380 aluminum composites
Qiu, Xiang1,2; Tariq, Naeem Ul Haq3; Qi, Lu1,2; Wang, Ji-Qiang1; Xiong, Tian-Ying1
Corresponding AuthorWang, Ji-Qiang(jqwang11s@imr.ac.cn) ; Xiong, Tian-Ying(tyxiong@imr.ac.cn)
2020-01-20
Source PublicationMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
ISSN0921-5093
Volume772Pages:10
AbstractThis study comprehensively determined the microstructure and mechanical properties of cold spray additively manufactured A380 alloy components. In this regard, three types of Al2O3/A380 composite deposits were prepared by separately mixing spherical, irregular, and spherical + irregular shaped Al2O3 particulates with the original A380 alloy powder. The as-sprayed deposits were subsequently subjected to heat-treatment at 350 degrees C for 4 h. The effects of Al2O3 morphology on the microstructure and mechanical properties of A380 deposits were systematically investigated at different processing stages by electron backscattered diffraction analysis and tensile testing, respectively. Moreover, the evolution of defects (pores and dislocation) inside the deposits was comprehensively studied using X-ray computed tomography and transmission electron microscopy techniques. The results indicated that the deposit containing spherical Al2O3 exhibited significantly reduced porosity, grain refinement and a significant increase in strength (similar to 70%) in contrast to the pure A380 alloy deposit. This could be attributed to the tamping effect of the spherical Al2O3 particles. In contrast, the irregular Al2O3 particles primarily indicated the embedding effect with recurrence of fragmentation events inside the deposit. Consequently, the deposit containing irregular Al2O3 indicated only a slight decrease in porosity and a 40% increase in strength in contrast to the pure A380 alloy deposit. The tensile test results indicated that heat-treatment significantly improved the plasticity of deposits through fusion of nano-sized pores, reduction in dislocation density and static re-crystallization. Therefore, the hybrid approach of adding a suitable tamping aid to the original A380 alloy powder and post-spray heat-treatment optimized the microstructure of cold spray additively manufactured components to significantly improve their mechanical properties.
KeywordCold spray additive manufacturing Al2O3 particles Heat-treatment Microstructure Mechanical properties
Funding OrganizationNational Natural Science Foundation of China
DOI10.1016/j.msea.2019.138828
Indexed BySCI
Language英语
Funding ProjectNational Natural Science Foundation of China[51671205]
WOS Research AreaScience & Technology - Other Topics ; Materials Science ; Metallurgy & Metallurgical Engineering
WOS SubjectNanoscience & Nanotechnology ; Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering
WOS IDWOS:000509621500075
PublisherELSEVIER SCIENCE SA
Citation statistics
Cited Times:5[WOS]   [WOS Record]     [Related Records in WOS]
Document Type期刊论文
Identifierhttp://ir.imr.ac.cn/handle/321006/137142
Collection中国科学院金属研究所
Corresponding AuthorWang, Ji-Qiang; Xiong, Tian-Ying
Affiliation1.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China
2.Univ Sci & Technol China, Sch Mat Sci & Engn, Shenyang 110016, Peoples R China
3.Pakistan Inst Engn & Appl Sci, Dept Met & Mat Engn, Islamabad, Pakistan
Recommended Citation
GB/T 7714
Qiu, Xiang,Tariq, Naeem Ul Haq,Qi, Lu,et al. A hybrid approach to improve microstructure and mechanical properties of cold spray additively manufactured A380 aluminum composites[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2020,772:10.
APA Qiu, Xiang,Tariq, Naeem Ul Haq,Qi, Lu,Wang, Ji-Qiang,&Xiong, Tian-Ying.(2020).A hybrid approach to improve microstructure and mechanical properties of cold spray additively manufactured A380 aluminum composites.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,772,10.
MLA Qiu, Xiang,et al."A hybrid approach to improve microstructure and mechanical properties of cold spray additively manufactured A380 aluminum composites".MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 772(2020):10.
Files in This Item:
There are no files associated with this item.
Related Services
Recommend this item
Bookmark
Usage statistics
Export to Endnote
Google Scholar
Similar articles in Google Scholar
[Qiu, Xiang]'s Articles
[Tariq, Naeem Ul Haq]'s Articles
[Qi, Lu]'s Articles
Baidu academic
Similar articles in Baidu academic
[Qiu, Xiang]'s Articles
[Tariq, Naeem Ul Haq]'s Articles
[Qi, Lu]'s Articles
Bing Scholar
Similar articles in Bing Scholar
[Qiu, Xiang]'s Articles
[Tariq, Naeem Ul Haq]'s Articles
[Qi, Lu]'s Articles
Terms of Use
No data!
Social Bookmark/Share
All comments (0)
No comment.
 

Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.