Temperature Effects on the Microstructures of Mg-Gd-Y Alloy Processed by Multi-direction Impact Forging

doi:10.1007/s40195-019-00972-6

IMR OpenIR

	Temperature Effects on the Microstructures of Mg-Gd-Y Alloy Processed by Multi-direction Impact Forging
	Shah, S. S. A.1,2; Wu, D.2; Chen, R. S.2; Song, G. S.1
通讯作者	Chen, R. S.(rschen@imr.ac.cn) ; Song, G. S.(song_ahut@163.com)
	2020-02-01
发表期刊	ACTA METALLURGICA SINICA-ENGLISH LETTERS
ISSN	1006-7191
卷号	33 期号:2 页码:243-251
摘要	A high strain rate multi-directional impact forging (MDIF) was applied to a solutionized Mg-Gd-Y-Zr alloy in the temperature range of 350-500 degrees C. Results demonstrate that the dominant deformation mode is twinning at a temperature below 400 degrees C, whereas at a medium temperature of 450 degrees C considerable continuous dynamic recrystallization was promoted by {10-12} extension twins. At a higher temperature of 500 degrees C, twinning activation was suppressed. New DRX grains were observed but their sizes were much bigger than those resulting from the MDIFed 50 passes at 450 degrees C, which are ascribed to the larger grain boundary mobility and atomic diffusion at 500 degrees C. Moreover, a non-basal weak texture was gained afterward MDIF at each temperature, which is credited to the MDIF process and the minor strain applied in each pass.
关键词	Magnesium alloys Twinning Dynamic recrystallization Forging Texture
资助者	National Key Research and Development Program of China ; National Natural Science Foundation of China (NSFC) ; National Basic Research Program of China (973 Program)
DOI	10.1007/s40195-019-00972-6
收录类别	SCI
语种	英语
资助项目	National Key Research and Development Program of China[2016YFB0301104] ; National Natural Science Foundation of China (NSFC)[51301173] ; National Natural Science Foundation of China (NSFC)[51531002] ; National Natural Science Foundation of China (NSFC)[51601193] ; National Basic Research Program of China (973 Program)[2013CB632202]
WOS研究方向	Metallurgy & Metallurgical Engineering
WOS类目	Metallurgy & Metallurgical Engineering
WOS记录号	WOS:000519309400002
出版者	CHINESE ACAD SCIENCES, INST METAL RESEARCH
引用统计	被引频次：7[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/137679
专题	中国科学院金属研究所
通讯作者	Chen, R. S.; Song, G. S.
作者单位	1.Anhui Univ Technol, Sch Mat Sci & Engn, Maanshan 243032, Peoples R China 2.Chinese Acad Sci, Inst Met Res, Grp Magnesium Alloys & Their Applicat, 62 Wencui Rd, Shenyang 110016, Peoples R China
推荐引用方式 GB/T 7714	Shah, S. S. A.,Wu, D.,Chen, R. S.,et al. Temperature Effects on the Microstructures of Mg-Gd-Y Alloy Processed by Multi-direction Impact Forging[J]. ACTA METALLURGICA SINICA-ENGLISH LETTERS,2020,33(2):243-251.
APA	Shah, S. S. A.,Wu, D.,Chen, R. S.,&Song, G. S..(2020).Temperature Effects on the Microstructures of Mg-Gd-Y Alloy Processed by Multi-direction Impact Forging.ACTA METALLURGICA SINICA-ENGLISH LETTERS,33(2),243-251.
MLA	Shah, S. S. A.,et al."Temperature Effects on the Microstructures of Mg-Gd-Y Alloy Processed by Multi-direction Impact Forging".ACTA METALLURGICA SINICA-ENGLISH LETTERS 33.2(2020):243-251.