Finite Element Simulation and Experiment of Multipass Hot Rolling for Ti-6Al-4V Alloy | |
Hu Ming1,2; Dong Limin2; Zhang Zhiqiang2; Lei Xiaofei2; Yang Rui2; Sha Yuhui1 | |
Corresponding Author | Dong Limin(lmdong@imr.ac.cn) |
2020-03-01 | |
Source Publication | RARE METAL MATERIALS AND ENGINEERING
![]() |
ISSN | 1002-185X |
Volume | 49Issue:3Pages:956-961 |
Abstract | The multipass hot rolling simulation of Ti-6Al-4V alloy was carried out by thermo-mechanical coupling method. The distribution characteristics of temperature and equivalent plastic strain at different passes on the cross section were studied. The simulation results show that the temperature of surface is lower than that of the center. With the increase of the rolling pass, the temperature of surface area decreases, while the temperature of the center increases first and then decreases. Equivalent plastic strains in both surface and center increase with the increase of the rolling passes. The equivalent strain in the center is larger than that in the surface. The experimental results show that with the increase of the rolling pass, the deformation of microstructure in the central region is larger than that in the surface region. The temperature in the central region is higher, where dynamic spheroidization occurs more easily. |
Keyword | Ti-6Al-4V alloy finite element simulation rolling |
Indexed By | SCI |
Language | 英语 |
WOS Research Area | Materials Science ; Metallurgy & Metallurgical Engineering |
WOS Subject | Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering |
WOS ID | WOS:000551278100030 |
Publisher | NORTHWEST INST NONFERROUS METAL RESEARCH |
Citation statistics | |
Document Type | 期刊论文 |
Identifier | http://ir.imr.ac.cn/handle/321006/139956 |
Collection | 中国科学院金属研究所 |
Corresponding Author | Dong Limin |
Affiliation | 1.Northeastern Univ, Minist Educ, Key Lab Anisotropy & Texture Mat, Shenyang 110819, Peoples R China 2.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China |
Recommended Citation GB/T 7714 | Hu Ming,Dong Limin,Zhang Zhiqiang,et al. Finite Element Simulation and Experiment of Multipass Hot Rolling for Ti-6Al-4V Alloy[J]. RARE METAL MATERIALS AND ENGINEERING,2020,49(3):956-961. |
APA | Hu Ming,Dong Limin,Zhang Zhiqiang,Lei Xiaofei,Yang Rui,&Sha Yuhui.(2020).Finite Element Simulation and Experiment of Multipass Hot Rolling for Ti-6Al-4V Alloy.RARE METAL MATERIALS AND ENGINEERING,49(3),956-961. |
MLA | Hu Ming,et al."Finite Element Simulation and Experiment of Multipass Hot Rolling for Ti-6Al-4V Alloy".RARE METAL MATERIALS AND ENGINEERING 49.3(2020):956-961. |
Files in This Item: | There are no files associated with this item. |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment