Effect of rolling temperature on microstructure and mechanical properties of Ti/steel clad plates fabricated by cold spraying and hot-rolling

doi:10.1016/j.msea.2020.139982

IMR OpenIR

	Effect of rolling temperature on microstructure and mechanical properties of Ti/steel clad plates fabricated by cold spraying and hot-rolling
	Zhao, Zhipo 1,2; Tang, Junrong 1,2; Tariq, Naeem ul Haq 3; Liu, Housheng 1,2; Liu, Hanhui 1,2; Ren, Yupeng 1,2; Tong, Min 1; Yin, Lisong 4; Du, Hao 1; Wang, Jiqiang 1; Xiong, Tianying 1
通讯作者	Wang, Jiqiang(jqwang11s@imr.ac.cn) ; Xiong, Tianying(tyxiong@imr.ac.cn)
	2020-09-23
发表期刊	MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
ISSN	0921-5093
卷号	795 页码:8
摘要	The effect of rolling temperature on the interfacial microstructure and mechanical properties of Ti/steel clad plates, fabricated by a newly designed method (cold spraying and hot-rolling), was studied. For this purpose, three rolling temperatures (i.e. 850, 950, 1050 degrees C) were selected to completely understand the bonding mechanism at Ti/steel interface. The type of interfacial compounds and thickness of the diffusion layers were found to be the main factors controlling the mechanical properties of the Ti/steel clad plates. Results showed that the Ti/steel clad plate rolled at 850 degrees C exhibited metallurgical bonding due to the formation of a 250 nm thick TiC diffusion layer at the interface, and resulted in the best elongation. In contrast, the sample rolled at 950 degrees C developed a 400 nm thick diffusion layer which was composed of TiC and FeTi compounds, leading to the best tensile strength. When the rolling temperature was increased to 1050 degrees C, the thickness of the diffusion layer (composed of coarse TiC and FeTi phases) was sharply increased to 4 mu m, and the sample displayed poor tensile strength and elongation.
关键词	Ti/steel clad plate Cold spraying Mechanical properties Microstructure Hot-rolling
资助者	National Natural Science Foundation of China ; Key Technology Research and Development Program of Guangdong
DOI	10.1016/j.msea.2020.139982
收录类别	SCI
语种	英语
资助项目	National Natural Science Foundation of China[51671205] ; Key Technology Research and Development Program of Guangdong[2106B01013003]
WOS研究方向	Science & Technology - Other Topics ; Materials Science ; Metallurgy & Metallurgical Engineering
WOS类目	Nanoscience & Nanotechnology ; Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering
WOS记录号	WOS:000576174400003
出版者	ELSEVIER SCIENCE SA
引用统计	被引频次：27[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/140813
专题	中国科学院金属研究所
通讯作者	Wang, Jiqiang; Xiong, Tianying
作者单位	1.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Liaoning, Peoples R China 2.Univ Sci & Technol China, Sch Mat Sci & Engn, Shenyang 110016, Liaoning, Peoples R China 3.Pakistan Inst Engn & Appl Sci, Dept Met & Mat Engn, Islamabad, Pakistan 4.Wuyi Univ, Jiangmen 520950, Peoples R China
推荐引用方式 GB/T 7714	Zhao, Zhipo,Tang, Junrong,Tariq, Naeem ul Haq,et al. Effect of rolling temperature on microstructure and mechanical properties of Ti/steel clad plates fabricated by cold spraying and hot-rolling[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2020,795:8.
APA	Zhao, Zhipo.,Tang, Junrong.,Tariq, Naeem ul Haq.,Liu, Housheng.,Liu, Hanhui.,...&Xiong, Tianying.(2020).Effect of rolling temperature on microstructure and mechanical properties of Ti/steel clad plates fabricated by cold spraying and hot-rolling.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,795,8.
MLA	Zhao, Zhipo,et al."Effect of rolling temperature on microstructure and mechanical properties of Ti/steel clad plates fabricated by cold spraying and hot-rolling".MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 795(2020):8.