IMR OpenIR
Investigate the Effect of the Magnetic Field on the Mechanical Properties of Silicone Rubber-Based Anisotropic Magnetorheological Elastomer during Curing Process
Li, Tao1,2; Abd El-Aty, Ali1,2,4; Cheng, Cheng1,2; Shen, Yizhou1,2; Wu, Cong1,2; Yang, Qiucheng1,2; Hu, Shenghan1,2; Xu, Yong3; Tao, Jie1,2; Guo, Xunzhong1,2
Corresponding AuthorTao, Jie(taojie@nuaa.edu.cn) ; Guo, Xunzhong(guoxunzhong@nuaa.edu.cn)
2020
Source PublicationJOURNAL OF RENEWABLE MATERIALS
ISSN2164-6325
Volume8Issue:11Pages:1411-1427
AbstractIn this investigation, a new silicone rubber-based MRE material was prepared to be used as a forming medium in manufacturing thin-walled complex-shaped Ni-based tubes through the bulging process. Thus, it is significant to investigate the effect of magnetic field intensity, magnetic field loading time, and angle on the mechanical properties of the prepared MRE material during the curing process. The obtained results showed that increasing the magnetic field intensity during the curing process can improve the orientation of the chain structure in the elastomer matrix effectively. However, its mechanical properties are the best under the corresponding magnetic field intensity of 321 mT. Besides, by extending the magnetic field loading time in the curing process, the orientation of the chain structure was optimized, at the same time, the mechanical properties were also improved, and the best loading time is about 20-25 min. By changing the loading angle of the magnetic field during the curing process, the mechanical properties of the MRE were improved. When the loading angle of the magnetic field is 90 degrees, the elastomer showed the best compression mechanical properties and excellent compression reversibility. Besides, for the anisotropic MRE material, the performance with magnetic compression is always better than that without magnetic compression.
KeywordMagnetorheological Elastomer (MRE) magnetic field curing process compression mechanical properties chain structure
Funding OrganizationNational Natural Science Foundation Key Project of China ; Jiangsu Province Key Research and Development Project ; Opening Project of Jiangsu Key Laboratory of Advanced Structural Materials and Application Technology ; Basic Scientific Research Operations
DOI10.32604/jrm.2020.012939
Indexed BySCI
Language英语
Funding ProjectNational Natural Science Foundation Key Project of China[U1937206] ; Jiangsu Province Key Research and Development Project[BE2019007-2] ; Opening Project of Jiangsu Key Laboratory of Advanced Structural Materials and Application Technology[ASMA201903] ; Basic Scientific Research Operations[NT2020015]
WOS Research AreaScience & Technology - Other Topics ; Materials Science ; Polymer Science
WOS SubjectGreen & Sustainable Science & Technology ; Materials Science, Composites ; Polymer Science
WOS IDWOS:000576283900003
PublisherTECH SCIENCE PRESS
Citation statistics
Cited Times:6[WOS]   [WOS Record]     [Related Records in WOS]
Document Type期刊论文
Identifierhttp://ir.imr.ac.cn/handle/321006/140857
Collection中国科学院金属研究所
Corresponding AuthorTao, Jie; Guo, Xunzhong
Affiliation1.Nanjing Univ Aeronaut & Astronaut, Coll Mat Sci & Technol, Nanjing 211100, Peoples R China
2.Jiangsu Key Lab Adv Struct Mat & Applicat, Nanjing 211100, Peoples R China
3.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China
4.Helwan Univ, Fac Engn Helwan, Mech Engn Dept, Cairo, Egypt
Recommended Citation
GB/T 7714
Li, Tao,Abd El-Aty, Ali,Cheng, Cheng,et al. Investigate the Effect of the Magnetic Field on the Mechanical Properties of Silicone Rubber-Based Anisotropic Magnetorheological Elastomer during Curing Process[J]. JOURNAL OF RENEWABLE MATERIALS,2020,8(11):1411-1427.
APA Li, Tao.,Abd El-Aty, Ali.,Cheng, Cheng.,Shen, Yizhou.,Wu, Cong.,...&Guo, Xunzhong.(2020).Investigate the Effect of the Magnetic Field on the Mechanical Properties of Silicone Rubber-Based Anisotropic Magnetorheological Elastomer during Curing Process.JOURNAL OF RENEWABLE MATERIALS,8(11),1411-1427.
MLA Li, Tao,et al."Investigate the Effect of the Magnetic Field on the Mechanical Properties of Silicone Rubber-Based Anisotropic Magnetorheological Elastomer during Curing Process".JOURNAL OF RENEWABLE MATERIALS 8.11(2020):1411-1427.
Files in This Item:
There are no files associated with this item.
Related Services
Recommend this item
Bookmark
Usage statistics
Export to Endnote
Google Scholar
Similar articles in Google Scholar
[Li, Tao]'s Articles
[Abd El-Aty, Ali]'s Articles
[Cheng, Cheng]'s Articles
Baidu academic
Similar articles in Baidu academic
[Li, Tao]'s Articles
[Abd El-Aty, Ali]'s Articles
[Cheng, Cheng]'s Articles
Bing Scholar
Similar articles in Bing Scholar
[Li, Tao]'s Articles
[Abd El-Aty, Ali]'s Articles
[Cheng, Cheng]'s Articles
Terms of Use
No data!
Social Bookmark/Share
All comments (0)
No comment.
 

Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.