Transformation Mechanism of (γ + γ') and the Effect of Cooling Rate on the Final Solidification of U720Li Alloy

IMR OpenIR

	Transformation Mechanism of (γ + γ') and the Effect of Cooling Rate on the Final Solidification of U720Li Alloy
其他题名	Transformation Mechanism of (γ + γ') and the Effect of Cooling Rate on the Final Solidification of U720Li Alloy
	Zhao Guangdi; Yang Guoliang; Liu Fang; Xin Xin; Sun Wenru
	2017
发表期刊	Acta Metallurgica Sinica(English Letters)
ISSN	1006-7191
卷号	30 期号:9 页码:887-894
摘要	The transformation mechanism of (γ + γ') was studied by analyzing the microstructure and elemental distribution of the U720Li samples heated at 1250 °C and cooled at the rates in the range of 1-100 °C/s. Although the (γ + γ') is deemed to be formed by a eutectic reaction and has been called eutectic (γ + γ'),it was found in the present study that the (γ + γ) precipitation begins with a peritectic reaction of (L + γ) → γ',and develops by the eutectic reaction of L → (γ + γ'). The energy for the γ' nucleation is low because the interfacial energy for the γ/γ' interface is about one-tenth of the solid/liquid interface, and hence, the nucleation rate is high and the fine structure of (γ + γ') is formed at the initial precipitation stage. The γ and γ' in (γ + γ') tend to grow into a lamellar structure because it is difficult for them to nucleate directly from the residual liquids, and hence, the γ' precipitates naturally tend to grow divergently direction of the regions rich in Al and Ti, forming a fan-like structure of the (γ + γ'). As a result, the γ' precipitates will coarsen finally because the space between them is enlarged. The solidification of the final residual liquids is a diffusion dependent process. When cooled at a higher rate, a higher degree of super cooling is reached and finally the solidification is finished by the pseudo-eutectic reaction of L → (γ + boride) and L → (γ + η), which can absorb Zr and B. When cooled at a rate low enough,most of the residual liquids are consumed by the (γ + γ') growth due to the sufficient diffusion, and the boride and Zrbearing phase are precipitated at a quasi-equilibrium state. Under this condition, Ti is depleted at the (γ + γ') growth front. However, the η-Ni_3Ti phase is formed there occasionally due to the boride precipitation, because the compositions of the two phases are complementary.
其他摘要	The transformation mechanism of (γ + γ') was studied by analyzing the microstructure and elemental distribution of the U720Li samples heated at 1250 °C and cooled at the rates in the range of 1-100 °C/s. Although the (γ + γ') is deemed to be formed by a eutectic reaction and has been called eutectic (γ + γ'),it was found in the present study that the (γ + γ) precipitation begins with a peritectic reaction of (L + γ) → γ',and develops by the eutectic reaction of L → (γ + γ'). The energy for the γ' nucleation is low because the interfacial energy for the γ/γ' interface is about one-tenth of the solid/liquid interface, and hence, the nucleation rate is high and the fine structure of (γ + γ') is formed at the initial precipitation stage. The γ and γ' in (γ + γ') tend to grow into a lamellar structure because it is difficult for them to nucleate directly from the residual liquids, and hence, the γ' precipitates naturally tend to grow divergently direction of the regions rich in Al and Ti, forming a fan-like structure of the (γ + γ'). As a result, the γ' precipitates will coarsen finally because the space between them is enlarged. The solidification of the final residual liquids is a diffusion dependent process. When cooled at a higher rate, a higher degree of super cooling is reached and finally the solidification is finished by the pseudo-eutectic reaction of L → (γ + boride) and L → (γ + η), which can absorb Zr and B. When cooled at a rate low enough,most of the residual liquids are consumed by the (γ + γ') growth due to the sufficient diffusion, and the boride and Zrbearing phase are precipitated at a quasi-equilibrium state. Under this condition, Ti is depleted at the (γ + γ') growth front. However, the η-Ni_3Ti phase is formed there occasionally due to the boride precipitation, because the compositions of the two phases are complementary.
关键词	U720Li (γ + γ') formation mechanism Cooling rate Solidification
收录类别	CSCD
语种	英语
CSCD记录号	CSCD:6065929
引用统计	被引频次：4[CSCD] [CSCD记录]
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/144696
专题	中国科学院金属研究所
作者单位	中国科学院金属研究所
推荐引用方式 GB/T 7714	Zhao Guangdi,Yang Guoliang,Liu Fang,et al. Transformation Mechanism of (γ + γ') and the Effect of Cooling Rate on the Final Solidification of U720Li Alloy[J]. Acta Metallurgica Sinica(English Letters),2017,30(9):887-894.
APA	Zhao Guangdi,Yang Guoliang,Liu Fang,Xin Xin,&Sun Wenru.(2017).Transformation Mechanism of (γ + γ') and the Effect of Cooling Rate on the Final Solidification of U720Li Alloy.Acta Metallurgica Sinica(English Letters),30(9),887-894.
MLA	Zhao Guangdi,et al."Transformation Mechanism of (γ + γ') and the Effect of Cooling Rate on the Final Solidification of U720Li Alloy".Acta Metallurgica Sinica(English Letters) 30.9(2017):887-894.