| 喷射成形Al-8.0Si-4．0Cu-0．5Mg合金的组织及性能 | |
| Alternative Title | Microstructure and mechanical properties of Al-8.0Si-4.0Cu-0.5Mg alloy billets prepared by spray forming |
| 田冲; 陈桂云; 杨林; 赵九洲 | |
| 2006 | |
| Source Publication | 轻合金加工技术
 |
| ISSN | 1007-7235 |
| Volume | 34.0Issue:1.0Pages:42-44 |
| Abstract | 采用喷射成形技术制备了Al-8.0Si-4．0Cu-0．5Mg合金棒材，分析了该合金的组织，研究了台金成形过程中孔洞及疏松的形成情况，测量了合金的力学性能及摩擦性能。结果表明，喷射成形工艺制备的合金具有细小均匀的微观组织结构，固溶、时效处理能够得到良好的弥散强化，具有良好的性能。 |
| Other Abstract | In this paper, billets of Al-8.0Si-4.0Cu-0.5Mg alloys were manufactured by spray forming methods with suitbale parameters. The microstructures of as-sprayed and heat-treated alloys were analysed. The results showes that the alloy prepared with fine microstructures was obtained. The factors of formation of porosities were discussed during the spray forming process. Tests indicated the alloys had fine ,nechincal and wear resistance properties. |
| Keyword | 喷射成形 Al-8.0Si-4．0Cu-0．5Mg合金 组织结构 |
| Indexed By | CSCD |
| Language | 中文 |
| CSCD ID | CSCD:2369662 |
| Citation statistics | |
| Document Type | 期刊论文 |
| Identifier | http://ir.imr.ac.cn/handle/321006/145451 |
| Collection | 中国科学院金属研究所 |
| Affiliation | 中国科学院金属研究所 |
| Recommended Citation GB/T 7714 | 田冲,陈桂云,杨林,等. 喷射成形Al-8.0Si-4．0Cu-0．5Mg合金的组织及性能[J]. 轻合金加工技术,2006,34.0(1.0):42-44. |
| APA | 田冲,陈桂云,杨林,&赵九洲.(2006).喷射成形Al-8.0Si-4．0Cu-0．5Mg合金的组织及性能.轻合金加工技术,34.0(1.0),42-44. |
| MLA | 田冲,et al."喷射成形Al-8.0Si-4．0Cu-0．5Mg合金的组织及性能".轻合金加工技术 34.0.1.0(2006):42-44. |
| Files in This Item: | There are no files associated with this item. | |||||
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment