5083铝合金表面单致密微弧氧化膜的制备及其性能研究

IMR OpenIR

	5083铝合金表面单致密微弧氧化膜的制备及其性能研究
其他题名	Preparation and Properties of Micro-arc Oxide Film with Single Dense Layer on Surface of 5083 Aluminum Alloy
	曹京宜 1; 方志刚 1; 陈晋辉 2; 陈志雄 2; 殷文昌 1; 杨延格 1; 张伟 3
	2020
发表期刊	中国腐蚀与防护学报
ISSN	1005-4537
卷号	40.0 期号:003 页码:251-258
摘要	采用响应曲面法对微弧氧化电解液体系进行了优化,并在5083铝合金表面进行了单致密微弧氧化涂层的制备。通过扫描电镜、X射线衍射仪、显微硬度计和极化曲线对铝合金微弧氧化膜的微观组织、显微硬度和耐蚀性进行了研究。结果表明:随着微弧氧化膜层厚度从30μm增加到90μm,烧结颗粒的尺寸从约为10μm增加到约为50μm,致密层由最初的20μm增加到70μm,陶瓷膜层中α-Al2O3的比例明显增加,涂层的硬度由900 HV提高到1500 HV。依据极化曲线和盐雾实验结果发现:随着微弧氧化时间的增加,微弧氧化膜的自腐蚀电流密度逐渐降低,钝化能力逐渐增强,膜层的耐腐蚀性能大幅度提高。
其他摘要	Marine Al-alloy 5083 owns low density,good weldability and high hardness,but it is easily suffered from pitting corrosion in sea water due to the effect of Cl-.Micro-arc oxidation(MAO)is an effective way to improve the corrosion resistance of Al-alloy.In the present study the electrolyte formula was optimized via response surface methodology so that to acquire a novel MAO coating on Al-alloy 5083,which composed of merely a dense layer.The prepare MAO coating was then characterized by scanning electron microscopy(SEM),X-ray diffraction(XRD),micro-hardness meter and dynamic polarization technology in terms of microstructure,micro-hardness and corrosion resistance.Results showed that in comparison with the coating prepared with the ordinary electrolyte,the thickness of the MAO coating increases from 30μm to 90μm,size of the sintered particles on MAO coating grown from 10μm to 50μm,and the thickness of the dense layer increased from 20μm to 70μm,accompanied by the increase of the percentage ofα-Al2O3 in the MAO coating as well.The hardness of the polished MAO coating increased from 900 HV to 1500 HV.Polarization curve and salt frog test results also found that with the increasing of micro-arc oxidation time,the corrosion current density of MAO coating was gradually decreased,while its passivation ability was enhanced.Therefore,corrosion resistance of Al-alloy 5083 was increased substantially in the presence of the MAO coating composed merely of a thick dense layer.
关键词	铝合金微弧氧化单致密层耐蚀性
收录类别	CSCD
语种	中文
CSCD记录号	CSCD:6741209
引用统计	被引频次：4[CSCD] [CSCD记录]
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/148450
专题	中国科学院金属研究所
作者单位	1.中国人民解放军92228部队 2.福建龙溪轴承股份有限公司 3.中国科学院金属研究所
推荐引用方式 GB/T 7714	曹京宜,方志刚,陈晋辉,等. 5083铝合金表面单致密微弧氧化膜的制备及其性能研究[J]. 中国腐蚀与防护学报,2020,40.0(003):251-258.
APA	曹京宜.,方志刚.,陈晋辉.,陈志雄.,殷文昌.,...&张伟.(2020).5083铝合金表面单致密微弧氧化膜的制备及其性能研究.中国腐蚀与防护学报,40.0(003),251-258.
MLA	曹京宜,et al."5083铝合金表面单致密微弧氧化膜的制备及其性能研究".中国腐蚀与防护学报 40.0.003(2020):251-258.