Dissimilar Al/Mg alloys friction stir lap welding with Zn foil assisted by ultrasonic

IMR OpenIR

	Dissimilar Al/Mg alloys friction stir lap welding with Zn foil assisted by ultrasonic
其他题名	Dissimilar Al/Mg alloys friction stir lap welding with Zn foil assisted by ultrasonic
	Ji Shude 1; Niu Shiyu 1; Liu Jianguang 2
	2019
发表期刊	JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
ISSN	1005-0302
卷号	35 期号:8 页码:1712-1718
摘要	The Zn-added ultrasonic assisted friction stir lap welding (UaFSLW) was carried out to improve the quality of dissimilar Al/Mg alloys joint. The effects of ultrasonic power on the joint quality were also investigated. The results indicated that the larger effective lap width and mixing region between Mg and Al (Mg/Al MR) were attained by Zn foil addition and external ultrasonic assistance. Compared with the conventional joint, the finer and better-distributed Mg-Zn IMCs placing the continuous Al-Mg IMCs were formed in the Mg/Al MR of the Zn-added UaFSLW joint. The Zn foil addition and external ultrasonic assistance significantly improved the tensile shear load of the joint, and the load was increased with the increase of the ultrasonic power. The maximum tensile shear load of 7.95 kN was attained, which was 52.6% larger than that of the conventional joint. (C) 2019 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.
其他摘要	The Zn-added ultrasonic assisted friction stir lap welding (UaFSLW) was carried out to improve the quality of dissimilar Al/Mg alloys joint. The effects of ultrasonic power on the joint quality were also investigated. The results indicated that the larger effective lap width and mixing region between Mg and Al (Mg/Al MR) were attained by Zn foil addition and external ultrasonic assistance. Compared with the conventional joint, the finer and better-distributed Mg-Zn IMCs placing the continuous Al-Mg IMCs were formed in the Mg/Al MR of the Zn-added UaFSLW joint. The Zn foil addition and external ultrasonic assistance significantly improved the tensile shear load of the joint, and the load was increased with the increase of the ultrasonic power. The maximum tensile shear load of 7.95 kN was attained, which was 52.6% larger than that of the conventional joint.
关键词	MICROSTRUCTURE EVOLUTION MECHANICAL-PROPERTIES TENSILE PROPERTIES ALUMINUM-ALLOY MG ALLOY MAGNESIUM STRENGTH JOINTS ARC LAYER Dissimilar Al/Mg alloys Friction stir lap welding Zn foil Ultrasonic power Microstructures Tensile shear load
收录类别	CSCD
语种	英语
资助项目	[National Natural Science Foundation of China]
CSCD记录号	CSCD:6568340
引用统计	被引频次：10[CSCD] [CSCD记录]
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/148894
专题	中国科学院金属研究所
作者单位	1.中国科学院金属研究所 2.Beijing Aeronaut Sci & Technol Res Institute COMAC, Beijing Key Lab Civil Aircraft Struct & Composite, Beijing 102211, Peoples R China
推荐引用方式 GB/T 7714	Ji Shude,Niu Shiyu,Liu Jianguang. Dissimilar Al/Mg alloys friction stir lap welding with Zn foil assisted by ultrasonic[J]. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,2019,35(8):1712-1718.
APA	Ji Shude,Niu Shiyu,&Liu Jianguang.(2019).Dissimilar Al/Mg alloys friction stir lap welding with Zn foil assisted by ultrasonic.JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,35(8),1712-1718.
MLA	Ji Shude,et al."Dissimilar Al/Mg alloys friction stir lap welding with Zn foil assisted by ultrasonic".JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY 35.8(2019):1712-1718.