| Dissimilar Al/Mg alloys friction stir lap welding with Zn foil assisted by ultrasonic | |
| Alternative Title | Dissimilar Al/Mg alloys friction stir lap welding with Zn foil assisted by ultrasonic |
| Ji Shude1; Niu Shiyu1; Liu Jianguang2 | |
| 2019 | |
| Source Publication | JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
 |
| ISSN | 1005-0302 |
| Volume | 35Issue:8Pages:1712-1718 |
| Abstract | The Zn-added ultrasonic assisted friction stir lap welding (UaFSLW) was carried out to improve the quality of dissimilar Al/Mg alloys joint. The effects of ultrasonic power on the joint quality were also investigated. The results indicated that the larger effective lap width and mixing region between Mg and Al (Mg/Al MR) were attained by Zn foil addition and external ultrasonic assistance. Compared with the conventional joint, the finer and better-distributed Mg-Zn IMCs placing the continuous Al-Mg IMCs were formed in the Mg/Al MR of the Zn-added UaFSLW joint. The Zn foil addition and external ultrasonic assistance significantly improved the tensile shear load of the joint, and the load was increased with the increase of the ultrasonic power. The maximum tensile shear load of 7.95 kN was attained, which was 52.6% larger than that of the conventional joint. (C) 2019 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology. |
| Other Abstract | The Zn-added ultrasonic assisted friction stir lap welding (UaFSLW) was carried out to improve the quality of dissimilar Al/Mg alloys joint. The effects of ultrasonic power on the joint quality were also investigated. The results indicated that the larger effective lap width and mixing region between Mg and Al (Mg/Al MR) were attained by Zn foil addition and external ultrasonic assistance. Compared with the conventional joint, the finer and better-distributed Mg-Zn IMCs placing the continuous Al-Mg IMCs were formed in the Mg/Al MR of the Zn-added UaFSLW joint. The Zn foil addition and external ultrasonic assistance significantly improved the tensile shear load of the joint, and the load was increased with the increase of the ultrasonic power. The maximum tensile shear load of 7.95 kN was attained, which was 52.6% larger than that of the conventional joint. |
| Keyword | MICROSTRUCTURE EVOLUTION MECHANICAL-PROPERTIES TENSILE PROPERTIES ALUMINUM-ALLOY MG ALLOY MAGNESIUM STRENGTH JOINTS ARC LAYER Dissimilar Al/Mg alloys Friction stir lap welding Zn foil Ultrasonic power Microstructures Tensile shear load |
| Indexed By | CSCD |
| Language | 英语 |
| Funding Project | [National Natural Science Foundation of China] |
| CSCD ID | CSCD:6568340 |
| Citation statistics |
Cited Times:3[CSCD]
[CSCD Record]
|
| Document Type | 期刊论文 |
| Identifier | http://ir.imr.ac.cn/handle/321006/148897 |
| Collection | 中国科学院金属研究所 |
| Affiliation | 1.中国科学院金属研究所 2.Beijing Aeronaut Sci & Technol Res Institute COMAC, Beijing Key Lab Civil Aircraft Struct & Composite, Beijing 102211, Peoples R China |
| Recommended Citation GB/T 7714 | Ji Shude,Niu Shiyu,Liu Jianguang. Dissimilar Al/Mg alloys friction stir lap welding with Zn foil assisted by ultrasonic[J]. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,2019,35(8):1712-1718. |
| APA | Ji Shude,Niu Shiyu,&Liu Jianguang.(2019).Dissimilar Al/Mg alloys friction stir lap welding with Zn foil assisted by ultrasonic.JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,35(8),1712-1718. |
| MLA | Ji Shude,et al."Dissimilar Al/Mg alloys friction stir lap welding with Zn foil assisted by ultrasonic".JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY 35.8(2019):1712-1718. |
| Files in This Item: | There are no files associated with this item. | |||||
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment