IMR OpenIR
T6热处理对复式连通双连续相SiC/Al复合材料性能的影响
其他题名Influence of T6 treatment on microstructure and compressive property of SiC/Al double-interpenetrating composites
赵龙志; 曹小明; 田冲; 胡宛平; 张劲松
2007
发表期刊材料研究学报
ISSN1005-3093
卷号21.0期号:1.0页码:57-61
摘要研究了T6热处理(固溶处理+时效)对复式连通双连续相SiC/Al复合材料的组织和压缩性能的影响.结果表明,经T6热处理后,复合材料基体中第二相共品硅从粗大的针状变成了细小的粒状,增强了弥散强化效果,时效析出相Mg2Si强化了基体;界面附近的基体中残余应力增大,使复合材料的压缩强度显著提高,材料的弹性模量和塑性稍稍降低.随着固溶时间的延长,复合材料的压缩强度先升高后降低.其影响机制是,随着固溶时间的延长共品硅扩散充分,球化完全,继而粗化长大,从而提高了弥散强化效果.随着时效时间的延长,材料中的残余应力减小,位错密度降低,时效强化相Mg2Si的强化能力减弱,使复合材料的压缩强度降低.
其他摘要Influence of T6 heat treatment (solution treatment+aging) on the microstructure and compressive property of SiC/Al double-interpenetrating composite were investigated. Results showed that the compressive strength of composites treated by T6 treatment increases obviously, but the elastic module and the plasticity decrease because of the morphology shape to fine particle and the strengthening of the change of eutectic silicon in matrix from coarse needle precipitation Mg2Si phase after T6 treatment. The compressive strength of composites get the peak value when the solution time is 8 hour for eutectic silicon is fining. The compressive strength is decreasing with the augment of aging time for the residual stress, density of dislocation and the strengthening of Mg2Si on the matrix fall.
关键词复式连通 T6热处理 组织 压缩性能
收录类别CSCD
语种中文
CSCD记录号CSCD:2756596
引用统计
被引频次:3[CSCD]   [CSCD记录]
文献类型期刊论文
条目标识符http://ir.imr.ac.cn/handle/321006/151453
专题中国科学院金属研究所
作者单位中国科学院金属研究所
推荐引用方式
GB/T 7714
赵龙志,曹小明,田冲,等. T6热处理对复式连通双连续相SiC/Al复合材料性能的影响[J]. 材料研究学报,2007,21.0(1.0):57-61.
APA 赵龙志,曹小明,田冲,胡宛平,&张劲松.(2007).T6热处理对复式连通双连续相SiC/Al复合材料性能的影响.材料研究学报,21.0(1.0),57-61.
MLA 赵龙志,et al."T6热处理对复式连通双连续相SiC/Al复合材料性能的影响".材料研究学报 21.0.1.0(2007):57-61.
条目包含的文件
条目无相关文件。
个性服务
推荐该条目
保存到收藏夹
查看访问统计
导出为Endnote文件
谷歌学术
谷歌学术中相似的文章
[赵龙志]的文章
[曹小明]的文章
[田冲]的文章
百度学术
百度学术中相似的文章
[赵龙志]的文章
[曹小明]的文章
[田冲]的文章
必应学术
必应学术中相似的文章
[赵龙志]的文章
[曹小明]的文章
[田冲]的文章
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。