IMR OpenIR
Fabrication of high nitrogen austenitic stainless steels with excellent mechanical and pitting corrosion properties
其他题名Fabrication of high nitrogen austenitic stainless steels with excellent mechanical and pitting corrosion properties
Li Huabing; Jiang Zhouhua; Cao Yang; Zhang Zurui
2009
发表期刊INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS
ISSN1674-4799
卷号16期号:4页码:387-392
摘要A series of high nitrogen austenitic stainless steels were successfully developed with a pressurized electroslag remelting furnace. Nitride additives and deoxidizer were packed into the stainless steel pipes, and then the stainless steel pipes were welded on the surface of an electrode with low nitrogen content to prepare a compound electrode. Using Si(3)N(4) as a nitrogen alloying source, the silicon contents in the ingots were prone to be out of the specification range, the electric current fluctuated greatly and the surface qualities of the ingots were poor. The surface qualities of the ingots were improved with FeCrN as a nitrogen alloying source. The sound and compact macrostructure ingot with the maximum nitrogen content of 1.21 wt% can be obtained. The 18Cr18Mn2Mo0.9N high nitrogen austenitic stainless steel exhibits high strength and good ductility at room temperature. The steel shows typical ductile-brittle transition behavior and excellent pitting corrosion resistance properties.
其他摘要A series of high nitrogen austenitic stainless steels were successfully developed with a pressurized electroslag remelting furnace.Nitride additives and deoxidizer were packed into the stainless steel pipes,and then the stainless steel pipes were welded on the surface of an electrode with low nitrogen content to prepare a compound electrode.Using Si3N4 as a nitrogen alloying source,the silicon contents in the ingots were prone to be out of the specification range,the electric current fluctuated greatly and the surface qualities of the ingots were poor.The surface qualities of the ingots were improved with FeCrN as a nitrogen alloying source.The sound and compact macrostructure ingot with the maximum nitrogen content of 1.21wt% can be obtained.The 18Cr18Mn2Mo(0.9)N high nitrogen austenitic stainless steel exhibits high strength and good ductility at room temperature.The steel shows typical duc-tile-brittle transition behavior and excellent pitting corrosion resistance properties.
关键词CLEAVAGE-LIKE FRACTURE TEMPERATURE high nitrogen austenitic stainless steels electroslag remelting nitrogen alloying ductile-brittle transition pitting corrosion resistance
收录类别CSCD
语种英语
资助项目[National Natural Science Foundation of China]
CSCD记录号CSCD:3675642
引用统计
文献类型期刊论文
条目标识符http://ir.imr.ac.cn/handle/321006/152834
专题中国科学院金属研究所
作者单位中国科学院金属研究所
推荐引用方式
GB/T 7714
Li Huabing,Jiang Zhouhua,Cao Yang,et al. Fabrication of high nitrogen austenitic stainless steels with excellent mechanical and pitting corrosion properties[J]. INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS,2009,16(4):387-392.
APA Li Huabing,Jiang Zhouhua,Cao Yang,&Zhang Zurui.(2009).Fabrication of high nitrogen austenitic stainless steels with excellent mechanical and pitting corrosion properties.INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS,16(4),387-392.
MLA Li Huabing,et al."Fabrication of high nitrogen austenitic stainless steels with excellent mechanical and pitting corrosion properties".INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS 16.4(2009):387-392.
条目包含的文件
条目无相关文件。
个性服务
推荐该条目
保存到收藏夹
查看访问统计
导出为Endnote文件
谷歌学术
谷歌学术中相似的文章
[Li Huabing]的文章
[Jiang Zhouhua]的文章
[Cao Yang]的文章
百度学术
百度学术中相似的文章
[Li Huabing]的文章
[Jiang Zhouhua]的文章
[Cao Yang]的文章
必应学术
必应学术中相似的文章
[Li Huabing]的文章
[Jiang Zhouhua]的文章
[Cao Yang]的文章
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。