Shear banding and fracture behaviors of a bulk metallic glass studied via in-situ bending experiments with notched and un-notched specimens | |
Li, Qiushi; Qu, Ruitao; Zhang, Zhefeng | |
2020-11-04 | |
Source Publication | MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
![]() |
Volume | 798 |
Abstract | The shear banding and fracture behaviors of Ti32.8Zr30.2Ni5.3Cu9Be22.7 bulk metallic glass (BMG) were studied via in-situ three-point bending experiments using notched and un-notched specimens. A notch strengthening effect was found based on comparing the nominal flexural strength of the notched and un-notched specimens. From in situ observations of the notched specimens, it was found that the first shear band initiated near the notch tip was followed by a spate of shear band initiations in a wider range of locations, leading to macroscopic yielding. The shear band zone continued to grow until the specimen fractured, with plastic strain being accommodated by repeated branching of shear bands and increase of shear offset in the earlier formed parts of shear bands. Sig-nificant differences in the 3-dimensional orientation and shear offset direction of shear bands were observed between the notched and un-notched specimens. These differences were analyzed by relating the elastic stress fields in the general direction of shear band growth, obtained by finite element modeling, to the ellipse criterion. |
DOI | 10.1016/j.msea.2020.140005 |
WOS ID | WOS:000587267500003 |
Citation statistics | |
Document Type | 期刊论文 |
Identifier | http://ir.imr.ac.cn/handle/321006/155659 |
Collection | 中国科学院金属研究所 |
Recommended Citation GB/T 7714 | Li, Qiushi,Qu, Ruitao,Zhang, Zhefeng. Shear banding and fracture behaviors of a bulk metallic glass studied via in-situ bending experiments with notched and un-notched specimens[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2020,798. |
APA | Li, Qiushi,Qu, Ruitao,&Zhang, Zhefeng.(2020).Shear banding and fracture behaviors of a bulk metallic glass studied via in-situ bending experiments with notched and un-notched specimens.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,798. |
MLA | Li, Qiushi,et al."Shear banding and fracture behaviors of a bulk metallic glass studied via in-situ bending experiments with notched and un-notched specimens".MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 798(2020). |
Files in This Item: | There are no files associated with this item. |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment