Effect of thermomechanical processing on mechanical properties of hot rolled multiphase steel | |
Alternative Title | Effect of Thermomechanical Processing on Mechanical Properties of Hot Rolled Multiphase Steel |
Li Zhuang1; Wu Di2; Lue HuiSheng3 | |
2008 | |
Source Publication | JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL
![]() |
ISSN | 1006-706X |
Volume | 15Issue:1Pages:55-60 |
Abstract | The effect of thermomechanical processing (TMP) on the mechanical properties of hot rolled multiphase steel was investigated. TMP was conducted using a laboratory hot rolling mill, in which three different kinds of finish rolling deformation degrees and temperatures were applied. The results indicate that polygonal ferrite, granular bainite, and a considerable amount of stabilized retained austenite can be obtained by TMP. The stability of the retained austenite increases with decreasing finish rolling temperature and increasing finish rolling deformation degrees. Ultimate tensile strength (sigma(b)) total elongation (delta), and the product of ultimate tensile strength by total elongation (sigma(b) - delta) for 50% reduction at finish rolling temperature of 700 degrees C reach maximum values 791 MPa, 36% and 28 476 (MPa center dot %), respectively. |
Other Abstract | The effect of thermomechanical processing(TMP)on the mechanical properties of hot rolled multiphase steel was investigated.TMP was conducted using a laboratory hot rolling mill,in which three different kinds of finish rolling deformation degrees and temperatures were applied.The results indicate that polygonal ferrite,granular bainite,and a considerable amount of stabilized retained austenite can be obtained by TMP.The stability of the retained austenite increases with decreasing finish rolling temperature and increasing finish rolling deformation degrees.Ultimate tensile strength(σb),total elongation(δ),and the product of ultimate tensile strength by total elongation(σb·δ)for 50% reduction at finish rolling temperature of 700 ℃ reach maximum values 791 MPa,36% and 28 476(MPa·%),respectively. |
Keyword | DUAL-PHASE STEEL TRIP STEELS INTERCRITICAL DEFORMATION RETAINED AUSTENITE SI TRANSFORMATION ADDITIONS NB AL hot rolled multiphase steel finish rolling deformation degree finish rolling temperature retained austenite mechanical property |
Indexed By | CSCD |
Language | 英语 |
CSCD ID | CSCD:3249260 |
Citation statistics | |
Document Type | 期刊论文 |
Identifier | http://ir.imr.ac.cn/handle/321006/155963 |
Collection | 中国科学院金属研究所 |
Affiliation | 1.中国科学院金属研究所 2.东北大学 3.Cent Iron & Steel Res Institute Grp, Dept Sci & Technol Informat, Beijing 100081, Peoples R China |
Recommended Citation GB/T 7714 | Li Zhuang,Wu Di,Lue HuiSheng. Effect of thermomechanical processing on mechanical properties of hot rolled multiphase steel[J]. JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL,2008,15(1):55-60. |
APA | Li Zhuang,Wu Di,&Lue HuiSheng.(2008).Effect of thermomechanical processing on mechanical properties of hot rolled multiphase steel.JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL,15(1),55-60. |
MLA | Li Zhuang,et al."Effect of thermomechanical processing on mechanical properties of hot rolled multiphase steel".JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL 15.1(2008):55-60. |
Files in This Item: | There are no files associated with this item. |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment