110取向镍基单晶合金在蠕变过程中的组织演变 | |
Alternative Title | Microstructure Evolution in a Nickel-base Single Crystal Superalloy with 110 Orientation during Creep Process |
水丽; 杨彦红; 于金江 | |
2009 | |
Source Publication | 机械工程材料
![]() |
ISSN | 1000-3738 |
Volume | 000Issue:006Pages:6-9 |
Abstract | 研究了一种110取向的镍基单晶高温合金在1040℃、150MPa和850℃、500MPa条件下的蠕变性能、蠕变过程中γ’相的形貌演变以及γ’相的筏化机理,并对拉断后试样的纵向截面进行了SEM形貌观察。结果表明:在1040℃、150MPa条件下,沿110取向施加应力拉伸时,合金中T/相形成了与应力轴成45°角的层片状筏化组织;距断口不同位置处γ’相的粗化程度存在明显差异;而在850℃、500MPa条件下,拉伸蠕变后合金中γ’相没有发生明显的粗化现象。 |
Other Abstract | The tensile creep tests were conducted on a Ni-base single crystal superalloy with 110 orientation under the conditions of 1 040 ℃/150 MPa and 850 ℃/500 MPa, respectively. The creep properties and the microstructure evolution during the creep process were investigated. The longitudinal section morphology of the tensile fracture was observed by SEM. The results show that the γ' phase of the Ni-base single crystal superalloy with 110 orientation formed the lamellar-type raft structure with inclined 45° with the stress axis under the condition of 1 040 ℃/150 MPa There was evident difference in the. degree of γ' phase coarsening at different distances away from the fractured surface. However, the γ' phase was not coarsened obviously under the condition of 850 ℃/500 MPa. |
Keyword | 镍基单晶高温合金 拉伸蠕变 γ’相 筏化组织 |
Indexed By | CSCD |
Language | 中文 |
CSCD ID | CSCD:3538376 |
Citation statistics |
Cited Times:1[CSCD]
[CSCD Record]
|
Document Type | 期刊论文 |
Identifier | http://ir.imr.ac.cn/handle/321006/156233 |
Collection | 中国科学院金属研究所 |
Affiliation | 中国科学院金属研究所 |
Recommended Citation GB/T 7714 | 水丽,杨彦红,于金江. 110取向镍基单晶合金在蠕变过程中的组织演变[J]. 机械工程材料,2009,000(006):6-9. |
APA | 水丽,杨彦红,&于金江.(2009).110取向镍基单晶合金在蠕变过程中的组织演变.机械工程材料,000(006),6-9. |
MLA | 水丽,et al."110取向镍基单晶合金在蠕变过程中的组织演变".机械工程材料 000.006(2009):6-9. |
Files in This Item: | There are no files associated with this item. |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment