COMPOSITION DESIGN OF HIGH-STRENGTH MARTENSITIC PRECIPITATION HARDENING STAINLESS STEELS BASED ON A CLUSTER MODEL

IMR OpenIR

	COMPOSITION DESIGN OF HIGH-STRENGTH MARTENSITIC PRECIPITATION HARDENING STAINLESS STEELS BASED ON A CLUSTER MODEL
其他题名	COMPOSITION DESIGN OF HIGH-STRENGTH MARTENSITIC PRECIPITATION HARDENING STAINLESS STEELS BASED ON A CLUSTER MODEL
	Wang Qing 1; Zha Qianfeng 1; Liu Enxue 1; Dong Chuang 1; Wang Xuejun 2; Tan Chaoxin 2; Ji Chunjun 3
	2012
发表期刊	ACTA METALLURGICA SINICA
ISSN	0412-1961
卷号	48 期号:10 页码:1201-1206
摘要	The present work investigates composition characteristics of martensitic precipitation hardening stainless steels using a cluster-plus-glue-atom model. In this kind of steels based on the basic ternary Fe-Ni-Cr, the lowest solubility limit of high-temperature austenite corresponds to the cluster formula NiFe12Cr-3, where NiFe12 is a cuboctahedron centered by Ni and surrounded by 12 Fe atoms in fcc structure and Cr serves as glue atoms. New multi-component alloys were designed by adding C, Mo, Nb and Cu into the basic NiFe12Cr-3 with self-magnification of cluster formula and similar element substitution. These alloys were prepared by copper mould suction casting method, then solid-solution treated at 1323 K for 2 h followed by water-quenching, and finally aged 753 K for 4 h. The experimental results show that the microstructures and properties of the serial solid-solution treated and aged alloys vary with alloying elements and their contents. Among them, the {(Ni13Cu3)Fe-192(Cr45MO2.5Nb0.5)}C-1 alloy has higher microhardness and tensile strengths, the hardness is 397 RV, yield strength is 971 MPa and ultra strength is 1093 MPa after aging treatment. {(Ni13Cu3)Fe-192(Cr45Mo2.5Nb0.5)}C-1 exhibits good corrosion-resistance in 3.5%NaCl solution.
关键词	METALLIC GLASSES MICROSTRUCTURE TOUGHNESS ELEMENTS ALLOYS HEAT matensitic precipitation hardening stainless steel cluster-plus-glue-atom model alloying composition design high strength
收录类别	CSCD
语种	英语
CSCD记录号	CSCD:4656636
引用统计	被引频次：15[CSCD] [CSCD记录]
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/156268
专题	中国科学院金属研究所
作者单位	1.大连理工大学 2.中国科学院金属研究所 3.大连大学
推荐引用方式 GB/T 7714	Wang Qing,Zha Qianfeng,Liu Enxue,et al. COMPOSITION DESIGN OF HIGH-STRENGTH MARTENSITIC PRECIPITATION HARDENING STAINLESS STEELS BASED ON A CLUSTER MODEL[J]. ACTA METALLURGICA SINICA,2012,48(10):1201-1206.
APA	Wang Qing.,Zha Qianfeng.,Liu Enxue.,Dong Chuang.,Wang Xuejun.,...&Ji Chunjun.(2012).COMPOSITION DESIGN OF HIGH-STRENGTH MARTENSITIC PRECIPITATION HARDENING STAINLESS STEELS BASED ON A CLUSTER MODEL.ACTA METALLURGICA SINICA,48(10),1201-1206.
MLA	Wang Qing,et al."COMPOSITION DESIGN OF HIGH-STRENGTH MARTENSITIC PRECIPITATION HARDENING STAINLESS STEELS BASED ON A CLUSTER MODEL".ACTA METALLURGICA SINICA 48.10(2012):1201-1206.