| Near threshold fatigue crack growth behavior in stainless steel under cyclic torsion | |
| Alternative Title | NEAR THRESHOLD FATIGUE CRACK GROWTH BEHAVIOR IN STAINLESS STEEL UNDER CYCLIC TORSION |
| Yu HC1; Zhang YJ1; Sun YG1; Xie SS1; Tanaka K1 | |
| 2005 | |
| Source Publication | ACTA METALLURGICA SINICA
 |
| ISSN | 0412-1961 |
| Volume | 41Issue:7Pages:721-726 |
| Abstract | Near threshold fatigue crack growth tests were conducted under torsion on circumferentially pre-cracked round bars of a stainless steel. The crack growth rate was decreased with crack extension because of the sliding contact of the crack faces. The crack growth rate without the influence of crack surface contact was determined by extrapolating the relationship between the crack growth rate and the crack extension to the zero crack length. The applied stress intensity factor range is divided into two parts: one is the effective value responsible for crack growth and the other is the shielding value dissolved by crack surfaces contact. The fatigue limits for crack initiation and fracture were predicted and the predicted values agreed well with the experimental results. |
| Keyword | MODE-III PROPAGATION BARS fatigue crack growth stress intensity factor threshold torsion |
| Indexed By | CSCD |
| Language | 英语 |
| CSCD ID | CSCD:2107232 |
| Citation statistics |
Cited Times:3[CSCD]
[CSCD Record]
|
| Document Type | 期刊论文 |
| Identifier | http://ir.imr.ac.cn/handle/321006/156368 |
| Collection | 中国科学院金属研究所 |
| Affiliation | 1.Institute Aeronaut Mat 2.Benxi Iron & Steel Co Ltd 3.中国科学院金属研究所 4.Baosteel Co Ltd 5.名古屋大学 |
| Recommended Citation GB/T 7714 | Yu HC,Zhang YJ,Sun YG,et al. Near threshold fatigue crack growth behavior in stainless steel under cyclic torsion[J]. ACTA METALLURGICA SINICA,2005,41(7):721-726. |
| APA | Yu HC,Zhang YJ,Sun YG,Xie SS,&Tanaka K.(2005).Near threshold fatigue crack growth behavior in stainless steel under cyclic torsion.ACTA METALLURGICA SINICA,41(7),721-726. |
| MLA | Yu HC,et al."Near threshold fatigue crack growth behavior in stainless steel under cyclic torsion".ACTA METALLURGICA SINICA 41.7(2005):721-726. |
| Files in This Item: | There are no files associated with this item. | |||||
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment