Effect of explosive compaction on microstructure of ODS FeCrAl alloy fabricated by oxidation method | |
Yan,Fuzhao1,2; Li,Jing1; Xiong,Liangyin1; Liu,Shi1 | |
通讯作者 | Yan,Fuzhao() |
2021-04-01 | |
发表期刊 | Materials Research Express
![]() |
卷号 | 8期号:4 |
摘要 | Abstract A fabrication process of 14Cr ODS FeCrAl alloy including direct oxidation treatment, explosive compaction and vacuum post-sintering was proposed herein. A thin oxide layer formed on the powder surface during a low-temperature oxidation treatment was crushed in the explosive compaction, resulting in the redistribution of oxides at prior powder boundary (PPB) and the subsequent formation of an exclusive iron oxide layer between the grains of compacted materials. A large number of defects (dislocations and grain boundaries) were also produced in the compacted particles. Through characterizing the evolution of oxide dispersoids during the course of fabrication, the contribution of explosive compaction to dislocations, nanoscale precipitates and mechanical properties was clarified. The results show that the iron oxide layer became the container for transporting oxygen and was dissolved during the post-sintering, which affected the composition of nanoscale precipitates. The high-density dislocations not only became the rapid diffusion paths of oxygen, aluminum and yttrium atom, but also became the preferential sites of Y-Al-O precipitation. With the manufacturing method, the more uniform distribution of oxide nanoparticles and the higher microhardness of ODS alloy were obtained. |
关键词 | ODS FeCrAl alloy explosive compaction defects Y-Al-O nanoparticles prior powder boundary |
DOI | 10.1088/2053-1591/abeea6 |
语种 | 英语 |
WOS记录号 | IOP:2053-1591-8-4-abeea6 |
出版者 | IOP Publishing |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | http://ir.imr.ac.cn/handle/321006/159393 |
专题 | 中国科学院金属研究所 |
通讯作者 | Yan,Fuzhao |
作者单位 | 1.Materials for Special Environments Division, CAS Key Laboratory of Nuclear Materials and Safety Assessment, Shi-changxu Innovation Center for Advanced Materials, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, People’s Republic of China 2.School of Materials Science and Engineering, University of Science and Technology of China, Shenyang 110016, People’s Republic of China |
推荐引用方式 GB/T 7714 | Yan,Fuzhao,Li,Jing,Xiong,Liangyin,et al. Effect of explosive compaction on microstructure of ODS FeCrAl alloy fabricated by oxidation method[J]. Materials Research Express,2021,8(4). |
APA | Yan,Fuzhao,Li,Jing,Xiong,Liangyin,&Liu,Shi.(2021).Effect of explosive compaction on microstructure of ODS FeCrAl alloy fabricated by oxidation method.Materials Research Express,8(4). |
MLA | Yan,Fuzhao,et al."Effect of explosive compaction on microstructure of ODS FeCrAl alloy fabricated by oxidation method".Materials Research Express 8.4(2021). |
条目包含的文件 | 条目无相关文件。 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论