Mechanical and Electrical Properties of Cu-W Composites with Micro-Oriented Structures

doi:10.11900/0412.1961.2020.00387

IMR OpenIR

	Mechanical and Electrical Properties of Cu-W Composites with Micro-Oriented Structures
	Han Ying 1; Wang Hongshuang 1; Cao Yundong 1; An Yuejun 1; Tan Guoqi 2; Li Shujun 2; Liu Zengqian 2; Zhang Zhefeng 2
通讯作者	Han Ying(hany_dq@sut.edu.cn)
	2021-08-01
发表期刊	ACTA METALLURGICA SINICA
ISSN	0412-1961
卷号	57 期号:8 页码:1009-1016
摘要	Cu-W composites that combine the merits of Cu and W show good electric and heat conductivity, resistance to arc erosion, and high strength, etc., and are good candidates for electric contact materials. Until now, several methods, including the high-temperature liquid phase sintering method and the hot-pressure sintering method, have been developed to fabricate Cu-W composites. However, these methods may cause an uneven distribution of constituents in the material and a relatively low density and poor electric conductivity of the material. In this study, a Cu-W composite with micro-oriented W lamellas was prepared by the infiltration method, and the mechanical and electrical properties were investigated and compared with a commercial Cu-W composite. The results showed that the compressive strength of the studied Cu-W composite with micro-oriented W lamellas was between 300 and 1100 MPa when the W content was between 50% and 90% (mass fraction). The compressive strength of the studied composites presented obvious anisotropy, and the strength along the direction parallel to the W lamellas was higher than that perpendicular to the W lamellas. Compared with commercial Cu-W composites with disordered W frameworks, composites with micro-oriented W lamellas exhibit a higher electrical conductivity and compressive strength along the W lamellar direction, which is mainly related to the regular arrangement of the two phases of Cu and W in the composites. The studied composite is expected to be used as an electrical contact material to significantly improve the effect of electric contracts and prolong their service life while reducing the mass of the components and energy consumption.Y
关键词	Cu-W composite micro-oriented structure mechanical property electrical property
DOI	10.11900/0412.1961.2020.00387
收录类别	SCI
语种	英语
WOS研究方向	Metallurgy & Metallurgical Engineering
WOS类目	Metallurgy & Metallurgical Engineering
WOS记录号	WOS:000671045500006
出版者	SCIENCE PRESS
引用统计	被引频次：2[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/160083
专题	中国科学院金属研究所
通讯作者	Han Ying
作者单位	1.Shenyang Univ Technol, Sch Elect Engn, Shenyang 110870, Peoples R China 2.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China
推荐引用方式 GB/T 7714	Han Ying,Wang Hongshuang,Cao Yundong,et al. Mechanical and Electrical Properties of Cu-W Composites with Micro-Oriented Structures[J]. ACTA METALLURGICA SINICA,2021,57(8):1009-1016.
APA	Han Ying.,Wang Hongshuang.,Cao Yundong.,An Yuejun.,Tan Guoqi.,...&Zhang Zhefeng.(2021).Mechanical and Electrical Properties of Cu-W Composites with Micro-Oriented Structures.ACTA METALLURGICA SINICA,57(8),1009-1016.
MLA	Han Ying,et al."Mechanical and Electrical Properties of Cu-W Composites with Micro-Oriented Structures".ACTA METALLURGICA SINICA 57.8(2021):1009-1016.