A comparative study on the microstructures and mechanical properties of the Mg-xCa/Mn/Ce alloys and pure Mg

doi:10.1016/j.msea.2020.140508

IMR OpenIR

	A comparative study on the microstructures and mechanical properties of the Mg-xCa/Mn/Ce alloys and pure Mg
	Zhao, Dongqing 1; Li, Guanyu 1; Li, Peiliang 1; Zhou, Jixue 1; Cheng, Kaiming 1; Liu, Yunteng 1; Yang, Yuansheng 1,2; Duan, Junpeng 3; Ghomashchi, Reza 4; Wang, Xitao 1
通讯作者	Zhao, Dongqing(zhaodq@sdas.org) ; Zhou, Jixue(zhoujx@sdas.org)
	2021-01-28
发表期刊	MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
ISSN	0921-5093
卷号	803 页码:9
摘要	A comparative study on the microstructures and mechanical properties of the extruded Mg-xCa/Mn/Ce (x = 0.25, 0.5, 1, 2.0 wt%) alloys and pure Mg has been carried out. It was found that when the addition of Ca, Mn and Ce was more than 0.25 wt%, 0.5 wt% and 0.5 wt% respectively, microstructures with fine grain sizes smaller than 5 mu m can be achieved by extruding at 375 degrees C with a extrusion ratio of 30 and a ram speed of 0.8 mm/s. While the grain size of pure magnesium extruded under the same condition was 26.6 mu m. The addition of Ca, Mn or Ce has significant effects on the textures of the extruded Mg-xCa/Mn/Ce alloys. The maximum intensity peaks in PF and IPF of Mg are all deviated by a certain degree with the addition of Ca, Mn or Ce. In the 12 extrusion alloys, Mg-0.5Ca/Mg-2Mn and Mg-1Ce exhibited better mechanical properties, whose ultimate tensile strength and elongation are 243.6 MPa, 233.7 MPa, 321.5 MPa and 25.6%, 20.7%, 7.6%. While the ultimate tensile strength and elongation of as-extruded pure Mg is 173.8 MPa and 16.0% respectively. Mg-xCa and Mg-0.25Ce alloys with weak texture showed weaker tension-compression asymmetry. The experimental results showed that it is feasible to prepare fine grained (<5 mu m) Mg-xCa/Mn/Ce alloys with much improved mechanical properties using conventional extrusion.
关键词	Magnesium Particle-stimulated nucleation Grain refinement Microstructure Mechanical property
资助者	National Key Research and Development Plan ; Youth Innovation and Technology Support Program of Shandong Provincial Colleges and Universities ; Program of Promoting Collaborative Innovation and Industrialization of Achievements of Jinan Municipal Universities and Research Institutes ; Natural Science Foundation of Shandong Province ; Shandong Province Key Research and Development Plan
DOI	10.1016/j.msea.2020.140508
收录类别	SCI
语种	英语
资助项目	National Key Research and Development Plan[2017YFB0103904] ; Youth Innovation and Technology Support Program of Shandong Provincial Colleges and Universities[2020KJA002] ; Program of Promoting Collaborative Innovation and Industrialization of Achievements of Jinan Municipal Universities and Research Institutes[2019GXRC030] ; Natural Science Foundation of Shandong Province[ZR2019PEM008] ; Shandong Province Key Research and Development Plan[2019JZZY020329]
WOS研究方向	Science & Technology - Other Topics ; Materials Science ; Metallurgy & Metallurgical Engineering
WOS类目	Nanoscience & Nanotechnology ; Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering
WOS记录号	WOS:000612662300002
出版者	ELSEVIER SCIENCE SA
引用统计	被引频次：19[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/160423
专题	中国科学院金属研究所
通讯作者	Zhao, Dongqing; Zhou, Jixue
作者单位	1.Qilu Univ Technol, Adv Mat Inst, Shandong Prov Key Lab High Strength Lightweight M, Shandong Acad Sci, Jinan 250014, Peoples R China 2.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China 3.Weihai Wanfeng Magnesium S&T Dev Co Ltd, Weihai 264200, Peoples R China 4.Univ Adelaide, Sch Mech Engn, Adelaide, SA 5005, Australia
推荐引用方式 GB/T 7714	Zhao, Dongqing,Li, Guanyu,Li, Peiliang,et al. A comparative study on the microstructures and mechanical properties of the Mg-xCa/Mn/Ce alloys and pure Mg[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2021,803:9.
APA	Zhao, Dongqing.,Li, Guanyu.,Li, Peiliang.,Zhou, Jixue.,Cheng, Kaiming.,...&Wang, Xitao.(2021).A comparative study on the microstructures and mechanical properties of the Mg-xCa/Mn/Ce alloys and pure Mg.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,803,9.
MLA	Zhao, Dongqing,et al."A comparative study on the microstructures and mechanical properties of the Mg-xCa/Mn/Ce alloys and pure Mg".MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 803(2021):9.