The tempering behavior of martensite/austenite islands on the mechanical properties of a low alloy Mn-Ni-Mo steel with granular bainite | |
Jiang, Zhonghua; Li, Yonghan; Yang, Zhendan; Wang, Pei; Li, Dianzhong; Li, Yiyi | |
Corresponding Author | Jiang, Zhonghua(zhjiang12s@imr.ac.cn) ; Li, Dianzhong(dzli@imr.ac.cn) |
2021-03-01 | |
Source Publication | MATERIALS TODAY COMMUNICATIONS
![]() |
ISSN | 2352-4928 |
Volume | 26Pages:9 |
Abstract | The effects of tempering on the microstructure and mechanical properties of a low alloy Mn-Ni-Mo steel were investigated. The results indicate that the steel is characterized by granular bainite consisting of bainitic ferrite, blocky islands of martensite and/or austenite (M-A islands) and film-type retained austenite (AR) before tempering. The volume fraction of AR decreases with an increase in the tempering temperature: slowly before 280 degrees C, rapidly at 350 degrees C, and approaching zero at 450 degrees C. When tempered at 280 degrees C, the steel has optimum mechanical properties because of the internal stress relaxation and the decomposition of blocky M-A islands, especially twinned martensite islands. Additionally, the enhancement of AR stability is to some extent responsible for improving the impact toughness. When tempered at 350-450 degrees C, tempering brittleness occurs, which results from the decomposition of the AR films into discrete flake-type carbides along the interfaces. Further increase in the tempering temperature results in high toughness and low strength of the steel, mainly due to the recovery and recrystallization of bainitic ferrite, and the precipitation of globular M3C carbides. |
Keyword | Granular bainite Tempering M-A islands Impact toughness Retained austenite |
Funding Organization | Liaoning Province Doctoral Research Initiation Fund ; Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences |
DOI | 10.1016/j.mtcomm.2021.102166 |
Indexed By | SCI |
Language | 英语 |
Funding Project | Liaoning Province Doctoral Research Initiation Fund[2020-BS-010] ; Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences[L2019F48] |
WOS Research Area | Materials Science |
WOS Subject | Materials Science, Multidisciplinary |
WOS ID | WOS:000634314700007 |
Publisher | ELSEVIER |
Citation statistics | |
Document Type | 期刊论文 |
Identifier | http://ir.imr.ac.cn/handle/321006/162106 |
Collection | 中国科学院金属研究所 |
Corresponding Author | Jiang, Zhonghua; Li, Dianzhong |
Affiliation | Chinese Acad Sci, Inst Met Res, Shenyang Natl Lab Mat Sci, 72 Wenhua Rd, Shenyang 110016, Peoples R China |
Recommended Citation GB/T 7714 | Jiang, Zhonghua,Li, Yonghan,Yang, Zhendan,et al. The tempering behavior of martensite/austenite islands on the mechanical properties of a low alloy Mn-Ni-Mo steel with granular bainite[J]. MATERIALS TODAY COMMUNICATIONS,2021,26:9. |
APA | Jiang, Zhonghua,Li, Yonghan,Yang, Zhendan,Wang, Pei,Li, Dianzhong,&Li, Yiyi.(2021).The tempering behavior of martensite/austenite islands on the mechanical properties of a low alloy Mn-Ni-Mo steel with granular bainite.MATERIALS TODAY COMMUNICATIONS,26,9. |
MLA | Jiang, Zhonghua,et al."The tempering behavior of martensite/austenite islands on the mechanical properties of a low alloy Mn-Ni-Mo steel with granular bainite".MATERIALS TODAY COMMUNICATIONS 26(2021):9. |
Files in This Item: | There are no files associated with this item. |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment