| The Improved Mechanical Anisotropy of a Commercial Al-Cu-Mg-Mn-Si (2017) Aluminum Alloy by Cross rolling | |
| Huang, Jiwu1,2; Jiang, Yingge1,3; Jiang, Fuqing1,4; Xu, Chenglong1 | |
| 通讯作者 | Jiang, Fuqing(fqjiang_imr@163.com) |
| 2021-08-21 | |
| 发表期刊 | ADVANCED ENGINEERING MATERIALS
 |
| ISSN | 1438-1656 |
| 页码 | 11 |
| 摘要 | The optimized thermomechanical process is an effective way to improve and control the properties of metallic alloys. Herein, the influence of unidirectional cold rolling and cross cold rolling on the texture and mechanical properties of a commercial Al-Cu-Mg-Mn-Si (2017) alloy is investigated. The Al sheets successfully prepared by the three cold rolling methods have different dominant texture components, and show different texture transformation routes during solution and aging treatments. In addition, the influence of the rolling direction on the texture of the 2017 alloy is discussed. The cross-rolled sheets subjected to artificial aging show the strongest yield strength of approximate to 366 MPa and ultimate tensile strength of approximate to 426 MPa, as well as excellent mechanical anisotropy. Its in-plane anisotropy (IPA), r over bar , and Delta r values are 0.7%, 0.576, and 0.042, respectively. The effects of texture and precipitates on the anisotropy of aged 2017 alloys are also discussed separately. This work may help to understand the relationship between rolling direction and the mechanical anisotropy of aluminum alloys and provide a basis for industrial production. |
| 关键词 | Al-Cu-Mg-Mn-Si alloys cross rolling mechanical anisotropy microstructures textures |
| 资助者 | Key-Area Research and Development Program of Guangdong Province |
| DOI | 10.1002/adem.202100831 |
| 收录类别 | SCI |
| 语种 | 英语 |
| 资助项目 | Key-Area Research and Development Program of Guangdong Province[2020B010186002] |
| WOS研究方向 | Materials Science |
| WOS类目 | Materials Science, Multidisciplinary |
| WOS记录号 | WOS:000686949700001 |
| 出版者 | WILEY-V C H VERLAG GMBH |
| 引用统计 | |
| 文献类型 | 期刊论文 |
| 条目标识符 | http://ir.imr.ac.cn/handle/321006/166818 |
| 专题 | 中国科学院金属研究所 |
| 通讯作者 | Jiang, Fuqing |
| 作者单位 | 1.Cent South Univ, Sch Mat Sci & Engn, Changsha 410083, Peoples R China 2.Cent South Univ, Minist Educ, Key Lab Nonferrous Metall Mat Sci & Engn, Changsha 410083, Peoples R China 3.Hunan Aerosp Magnetoelect Co Ltd, Hunan Prov Enterprise Technol Ctr, Changsha 410200, Peoples R China 4.Chinese Acad Sci, Inst Met Res, Shenyang Natl Lab Mat Sci, Shenyang 110016, Peoples R China |
| 推荐引用方式 GB/T 7714 | Huang, Jiwu,Jiang, Yingge,Jiang, Fuqing,et al. The Improved Mechanical Anisotropy of a Commercial Al-Cu-Mg-Mn-Si (2017) Aluminum Alloy by Cross rolling[J]. ADVANCED ENGINEERING MATERIALS,2021:11. |
| APA | Huang, Jiwu,Jiang, Yingge,Jiang, Fuqing,&Xu, Chenglong.(2021).The Improved Mechanical Anisotropy of a Commercial Al-Cu-Mg-Mn-Si (2017) Aluminum Alloy by Cross rolling.ADVANCED ENGINEERING MATERIALS,11. |
| MLA | Huang, Jiwu,et al."The Improved Mechanical Anisotropy of a Commercial Al-Cu-Mg-Mn-Si (2017) Aluminum Alloy by Cross rolling".ADVANCED ENGINEERING MATERIALS (2021):11. |
| 条目包含的文件 | 条目无相关文件。 | |||||
除非特别说明，本系统中所有内容都受版权保护，并保留所有权利。
修改评论