Study on Milling Mechanism and Surface Quality of High Volume Fraction SiCp/Al2024 Composites

doi:10.1007/s12666-021-02381-9

IMR OpenIR

	Study on Milling Mechanism and Surface Quality of High Volume Fraction SiCp/Al2024 Composites
	Jin, Po 1; Gao, Qi 1; Wang, Quanzhao 2; Jing, Xiaofei 1
通讯作者	Gao, Qi(qqonline@163.com)
	2021-08-29
发表期刊	TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS
ISSN	0972-2815
页码	12
摘要	In this paper, Abaqus software was used to construct a SiCp/Al2024 composite cutting simulation model with a multi-particle random distribution model, and the particle removal mechanism and surface defect evolution under mesoscopic size were analyzed. In addition, the influence of spindle speed on particle removal and surface defect formation was studied, and the best cutting parameter combination was explored. The results show that in the milling of high volume fraction SiCp/Al2024 composites, because the cutting edge radius of the tool is much larger than the particle size, the main form of particle removal is crushing. The surface defects of the workpiece mainly include pits, cracks, scratches and sliding layers. Increasing the cutting speed will increase the surface defects of the workpiece and the surface quality will deteriorate. The feed rate has the greatest influence on the surface roughness, followed by the spindle speed, and the milling depth has the least influence. The best combination of surface roughness is 14000 r/min spindle speed, 0.072 m/min feed rate and 45 mu m milling depth. At this time, the surface roughness of the workpiece is 0.578 mu m.
关键词	SiCp Al2024 composites Milling mechanism Surface roughness Orthogonal test
资助者	National Natural Science Foundation of China ; Doctoral Start-up Fund of Liaoning Province
DOI	10.1007/s12666-021-02381-9
收录类别	SCI
语种	英语
资助项目	National Natural Science Foundation of China[51775100] ; Doctoral Start-up Fund of Liaoning Province[2019-BS-123]
WOS研究方向	Metallurgy & Metallurgical Engineering
WOS类目	Metallurgy & Metallurgical Engineering
WOS记录号	WOS:000690805700001
出版者	SPRINGER INDIA
引用统计
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/166834
专题	中国科学院金属研究所
通讯作者	Gao, Qi
作者单位	1.Liaoning Univ Technol, Sch Mech Engn & Automat, Jinzhou 121001, Peoples R China 2.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China
推荐引用方式 GB/T 7714	Jin, Po,Gao, Qi,Wang, Quanzhao,et al. Study on Milling Mechanism and Surface Quality of High Volume Fraction SiCp/Al2024 Composites[J]. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS,2021:12.
APA	Jin, Po,Gao, Qi,Wang, Quanzhao,&Jing, Xiaofei.(2021).Study on Milling Mechanism and Surface Quality of High Volume Fraction SiCp/Al2024 Composites.TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS,12.
MLA	Jin, Po,et al."Study on Milling Mechanism and Surface Quality of High Volume Fraction SiCp/Al2024 Composites".TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2021):12.