Microstructure and Frictional Wear Behavior of FeCrNiMo Alloy Layer Fabricated by Laser Cladding

doi:10.11900/0412.1961.2020.00320

IMR OpenIR

	Microstructure and Frictional Wear Behavior of FeCrNiMo Alloy Layer Fabricated by Laser Cladding
	Zhao Wanxin 1; Zhou Zheng 1; Huang Jie 1; Yang Yange 2; Du Kaiping 3; He Dingyong 1
通讯作者	Zhou Zheng(zhouzhengbjut@bjut.edu.cn)
	2021-10-11
发表期刊	ACTA METALLURGICA SINICA
ISSN	0412-1961
卷号	57 期号:10 页码:1291-1298
摘要	To satisfy the requirement for martensite stainless steel layers with high efficiency, an optimized FeNiCrMo alloy layer was prepared using the laser cladding technique. The microstructure and frictional wear behavior of the cladding layer (a single layer with a thickness exceeding 2 mm) were investigated. The results confirmed a homogeneous thickness and crack-free character of the cladding layer. In the microstructure, equiaxed, dendritic and cellular grains were distributed along the thickness direction, and martensite and Cr/Mo-rich ferrite were observed in the dendritic and inter-dendritic regions, respectively. The frictional coefficient and wear volume of the cladding layer increased under increasing applied loads in a block-on-ring wear test, and the wear mechanism was dominated by abrasive and oxidative wear types. Under higher loads, adhesive wear prevailed. In a ball-on-disc wear test, increasing the temperature decreased the frictional coefficient and increased the wear volume. Oxidative and fatigue wear dominated the wear mechanism under this condition.
关键词	laser cladding FeCrNiMo stainless steel microstructure frictional wear
DOI	10.11900/0412.1961.2020.00320
收录类别	SCI
语种	英语
WOS研究方向	Metallurgy & Metallurgical Engineering
WOS类目	Metallurgy & Metallurgical Engineering
WOS记录号	WOS:000696196100007
出版者	SCIENCE PRESS
引用统计	被引频次：6[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/167004
专题	中国科学院金属研究所
通讯作者	Zhou Zheng
作者单位	1.Beijing Univ Technol, Fac Mat & Mfg, Beijing 100124, Peoples R China 2.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China 3.BGRIMM Technol Grp, Beijing 100160, Peoples R China
推荐引用方式 GB/T 7714	Zhao Wanxin,Zhou Zheng,Huang Jie,et al. Microstructure and Frictional Wear Behavior of FeCrNiMo Alloy Layer Fabricated by Laser Cladding[J]. ACTA METALLURGICA SINICA,2021,57(10):1291-1298.
APA	Zhao Wanxin,Zhou Zheng,Huang Jie,Yang Yange,Du Kaiping,&He Dingyong.(2021).Microstructure and Frictional Wear Behavior of FeCrNiMo Alloy Layer Fabricated by Laser Cladding.ACTA METALLURGICA SINICA,57(10),1291-1298.
MLA	Zhao Wanxin,et al."Microstructure and Frictional Wear Behavior of FeCrNiMo Alloy Layer Fabricated by Laser Cladding".ACTA METALLURGICA SINICA 57.10(2021):1291-1298.