Wettability and Interfacial Reactions Between Metallic Glass Melts and Cu/Mo Used as Roller Materials for Twin-Roll Casting | |
Wu, Yi1,2; Zhang, Long1; Zhang, Hongwei1; Fu, Huameng1; Zhu, Zhengwang1; Li, Hong1; Wang, Aimin1; Zhang, Haifeng1 | |
通讯作者 | Zhang, Long(zhanglong@imr.ac.cn) ; Zhang, Haifeng(hfzhang@imr.ac.cn) |
2021-11-24 | |
发表期刊 | ACTA METALLURGICA SINICA-ENGLISH LETTERS
![]() |
ISSN | 1006-7191 |
页码 | 10 |
摘要 | Twin-roll casting has been recently revealed to be an efficient technique to produce rejuvenated metallic glass (MG) strips. Due to the high melting point and high hardness, pure Mo is considered as a good roller material as pure Cu. However, the wettability and interfacial reactions between MG melts and Cu or Mo remain largely unknown. In this work, a series of sessile droplet wetting experiments are designed to investigate the wettability and reactions between Zr41.2Ti13.8Cu1.25Ni10Be22.5 (Vit.1) or (Zr0.401Ti0.133CU0.118Ni0.101Be0.247)(99)Nb-1 (Nb1) MG melts and Cu/Mo substrates at temperatures of 1073, 1123 and 1173 K. It is found that the wettability and interfacial reactions of the Vit.1 and Nb1 MG melts on the Cu substrates are very similar. The equilibrium contact angles are similar to 30 degrees at 1073 K and similar to 25 degrees-27 degrees at 1123 K. The MG melts completely spread out on the Cu substrates at 1173 K. Cu substrates are slightly dissolved in the MG melts event at 1073 K, and a transitional reaction layer exists between the droplet and the Cu substrate. In comparison, the Vit.1 MG melt exhibits a much improved wettability on the Mo substrate. The equilibrium contact angle of the Vit.1/Mo is only 6 degrees at 1073 K and 5 degrees at 1123 K. No significant diffusion of Mo into the droplet occurs even at 1173 K with a holding time of similar to 30 min. The interfaces of the Vit.1/Mo samples are sharp, and no interfacial reaction layers form. These findings indicate that pure Mo can be a good roller material for twin-roll casting at high temperatures, and the Mo-made rollers are expected of capability to produce MG strips with good quality. |
关键词 | Metallic glass Wettability Interfacial reaction Twin-roll casting Roller material |
资助者 | National Natural Science Foundation of China ; National Key Research and Development Program of China ; Science and Technology on Transient Impact Laboratory ; Liaoning Revitalization Talents Program ; Chinese Academy of Sciences ; Youth Innovation Promotion Association CAS |
DOI | 10.1007/s40195-021-01356-5 |
收录类别 | SCI |
语种 | 英语 |
资助项目 | National Natural Science Foundation of China[51790484] ; National Natural Science Foundation of China[52171164] ; National Key Research and Development Program of China[2018YFB0703402] ; Science and Technology on Transient Impact Laboratory[6142606192208] ; Liaoning Revitalization Talents Program[XLYC1802078] ; Liaoning Revitalization Talents Program[XLYC1807062] ; Chinese Academy of Sciences[ZDBS-LY-JSC023] ; Youth Innovation Promotion Association CAS[2021188] |
WOS研究方向 | Metallurgy & Metallurgical Engineering |
WOS类目 | Metallurgy & Metallurgical Engineering |
WOS记录号 | WOS:000722169400002 |
出版者 | CHINESE ACAD SCIENCES, INST METAL RESEARCH |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | http://ir.imr.ac.cn/handle/321006/167500 |
专题 | 中国科学院金属研究所 |
通讯作者 | Zhang, Long; Zhang, Haifeng |
作者单位 | 1.Chinese Acad Sci, Shi Changxu Innovat Ctr Adv Mat, Inst Met Res, Shenyang 110016, Peoples R China 2.Univ Sci & Technol China, Sch Mat Sci & Engn, Hefei 230026, Peoples R China |
推荐引用方式 GB/T 7714 | Wu, Yi,Zhang, Long,Zhang, Hongwei,et al. Wettability and Interfacial Reactions Between Metallic Glass Melts and Cu/Mo Used as Roller Materials for Twin-Roll Casting[J]. ACTA METALLURGICA SINICA-ENGLISH LETTERS,2021:10. |
APA | Wu, Yi.,Zhang, Long.,Zhang, Hongwei.,Fu, Huameng.,Zhu, Zhengwang.,...&Zhang, Haifeng.(2021).Wettability and Interfacial Reactions Between Metallic Glass Melts and Cu/Mo Used as Roller Materials for Twin-Roll Casting.ACTA METALLURGICA SINICA-ENGLISH LETTERS,10. |
MLA | Wu, Yi,et al."Wettability and Interfacial Reactions Between Metallic Glass Melts and Cu/Mo Used as Roller Materials for Twin-Roll Casting".ACTA METALLURGICA SINICA-ENGLISH LETTERS (2021):10. |
条目包含的文件 | 条目无相关文件。 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论