Superior low cycle fatigue property from cell structures in additively manufactured 316L stainless steel

doi:10.1016/j.jmst.2021.10.006

IMR OpenIR

	Superior low cycle fatigue property from cell structures in additively manufactured 316L stainless steel
	Cui, Luqing 1; Deng, Dunyong 1; Jiang, Fuqing 2; Peng, Ru Lin 1; Xin, Tongzheng 3; Mousavian, Reza Taherzadeh 4; Yang, Zhiqing 2,5; Moverare, Johan 1
通讯作者	Yang, Zhiqing(yangzq@imr.ac.cn) ; Moverare, Johan(johan.moverare@liu.se)
	2022-06-01
发表期刊	JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
ISSN	1005-0302
卷号	111 页码:268-278
摘要	We have investigated the low cycle fatigue (LCF) properties and the extent of strengthening in a dense additively manufactured stainless steel containing different volume fractions of cell structures but having all other microstructure characteristics the same. The samples were produced by laser powder bed fusion (L-PBF), and the concentration of cell structures was varied systematically by varying the annealing treatments. Load-controlled fatigue experiments performed on samples with a high fraction of cell structures reveal an up to 23 times increase in fatigue life compared to an essentially cell-free sample of the same grain configuration. Multiscale electron microscopy characterizations reveal that the cell structures serve as the soft barriers to the dislocation propagation and the partials are the main carrier for cyclic loading. The cell structures, stabilized by the segregated atoms and misorientation between the adjacent cells, are retained during the entire plastic deformation, hence, can continuously interact with dislocations, promote the formation of nanotwins, and provide massive 3D network obstacles to the dislocation motion. The compositional micro-segregation caused by the cellular solidification features serves as another non negligible strengthening mechanism to dislocation motion. Specifically, the cell structures with a high density of dislocation debris also appear to act as dislocation nucleation sites, very much like coherent twin boundaries. This work indicates the potential of additive manufacturing to design energy absorbent alloys with high performance by tailoring the microstructure through the printing process. (c) 2021 Published by Elsevier Ltd on behalf of Chinese Society for Metals. This is an open access article under the CC BY license ( http://creativecommons.org/licenses/by/4.0/ )
关键词	Additive manufacturing 316L stainless steel Fatigue behavior Cellular structure Nanotwins
资助者	Swedish Governmental Agency for Innovation Systems (Vinnova) ; Science Foundation Ireland (SFI) ; Center for Additive Manufacturing-metal (CAM2) ; Ji Hua Laboratory
DOI	10.1016/j.jmst.2021.10.006
收录类别	SCI
语种	英语
资助项目	Swedish Governmental Agency for Innovation Systems (Vinnova)[2016-05175] ; Science Foundation Ireland (SFI)[16/RC/3872] ; Center for Additive Manufacturing-metal (CAM2) ; Ji Hua Laboratory[X210141TL210]
WOS研究方向	Materials Science ; Metallurgy & Metallurgical Engineering
WOS类目	Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering
WOS记录号	WOS:000788811500007
出版者	JOURNAL MATER SCI TECHNOL
引用统计	被引频次：32[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/172570
专题	中国科学院金属研究所
通讯作者	Yang, Zhiqing; Moverare, Johan
作者单位	1.Linkoping Univ, Dept Management & Engn, Div Engn Mat, SE-58183 Linkoping, Sweden 2.Chinese Acad Sci, Inst Met Res, Shenyang Natl Lab Mat Sci, Shenyang 110016, Peoples R China 3.Univ New South Wales, Sch Mat Sci & Engn, Sydney, NSW 2052, Australia 4.Dublin City Univ, Adv Mfg Res Ctr, I Form, Dublin 9, Ireland 5.Ji Hua Lab, Foshan 528200, Peoples R China
推荐引用方式 GB/T 7714	Cui, Luqing,Deng, Dunyong,Jiang, Fuqing,et al. Superior low cycle fatigue property from cell structures in additively manufactured 316L stainless steel[J]. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,2022,111:268-278.
APA	Cui, Luqing.,Deng, Dunyong.,Jiang, Fuqing.,Peng, Ru Lin.,Xin, Tongzheng.,...&Moverare, Johan.(2022).Superior low cycle fatigue property from cell structures in additively manufactured 316L stainless steel.JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY,111,268-278.
MLA	Cui, Luqing,et al."Superior low cycle fatigue property from cell structures in additively manufactured 316L stainless steel".JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY 111(2022):268-278.