A hot-compression bonding method for manufacturing large high-speed homogeneous steels

doi:10.1016/j.jmrt.2022.01.043

IMR OpenIR

	A hot-compression bonding method for manufacturing large high-speed homogeneous steels
	Liu, Weifeng 1,2; Zhang, Jianyang 1; Sun, Mingyue 1; Xu, Bin 1; Cao, Yanfei 1; Li, Dianzhong 1
通讯作者	Sun, Mingyue(mysun@imr.ac.cn) ; Li, Dianzhong(dzli@imr.ac.cn)
	2022-03-01
发表期刊	JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
ISSN	2238-7854
卷号	17 页码:507-520
摘要	Hot-compression bonding with subsequent soaking treatment is employed to manufacture large high-speed homogeneous steels in the current study. The effects of the deformation temperature (1050, 1100, and 1150 ?), strain (10%, 30%, and 50%), and holding time (1 and 12 h) on the interfacial microstructure and tensile strength of joints were investigated. The results indicated that complete bonding occurred at 1050 ?/50%, 1100 ?/30%, 1100 ?/50%, 1150 ?/30%, and 1150 ?/50%, and the tensile strength of the obtained joints was comparable to that of the base material. In other cases, interfacial voids were formed along the straight interface, which deteriorated the bonding strength. These voids were eliminated by a post-holding treatment at 1150 ?& nbsp;for 12 h, promoting the transformation of a straight interface to bulged grain boundaries. This resulted in the complete healing of the interface, except for samples bonded at 1050 ?/10%. The bulging of the original bonding interface due to the plastic deformation and atomic diffusion was the main mechanism for interfacial healing. Stable interfacial oxide nanoparticles were formed under a high vacuum and did not affect the recovery of joint strength. To validate the practicality of this method, an integrated high-speed steel with a homogeneous tensile strength was manufactured by bonding four pieces of blanks. (C)& nbsp;2022 The Author(s). Published by Elsevier B.V.& nbsp;
关键词	Hot-compression bonding High-speed steel Interfacial microstructure Interfacial healing Tensile strength
资助者	National Key Research and Development Program ; National Natural Science Foundation of China ; National Science and Technology Major Project of China ; Strategic Priority Research Program of the Chinese Academy of Sciences ; LingChuang Research Project of China Na-tional Nuclear Corporation Program of CAS Interdisciplinary Innovation Team ; Youth Innovation Promotion Association, CAS
DOI	10.1016/j.jmrt.2022.01.043
收录类别	SCI
语种	英语
资助项目	National Key Research and Development Program[2018YFA0702900] ; National Natural Science Foundation of China[51774265] ; National Natural Science Foundation of China[51701225] ; National Science and Technology Major Project of China[2019ZX06004010] ; National Science and Technology Major Project of China[2017-VII-0008-0101] ; Strategic Priority Research Program of the Chinese Academy of Sciences[XDC04000000] ; LingChuang Research Project of China Na-tional Nuclear Corporation Program of CAS Interdisciplinary Innovation Team ; Youth Innovation Promotion Association, CAS
WOS研究方向	Materials Science ; Metallurgy & Metallurgical Engineering
WOS类目	Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering
WOS记录号	WOS:000779145400002
出版者	ELSEVIER
引用统计	被引频次：18[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/172822
专题	中国科学院金属研究所
通讯作者	Sun, Mingyue; Li, Dianzhong
作者单位	1.Chinese Acad Sci, Inst Met Res, Shenyang Natl Lab Mat Sci, Shenyang 110016, Peoples R China 2.Univ Sci & Technol China, Coll Mat Sci & Engn, Hefei 230026, Peoples R China
推荐引用方式 GB/T 7714	Liu, Weifeng,Zhang, Jianyang,Sun, Mingyue,et al. A hot-compression bonding method for manufacturing large high-speed homogeneous steels[J]. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T,2022,17:507-520.
APA	Liu, Weifeng,Zhang, Jianyang,Sun, Mingyue,Xu, Bin,Cao, Yanfei,&Li, Dianzhong.(2022).A hot-compression bonding method for manufacturing large high-speed homogeneous steels.JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T,17,507-520.
MLA	Liu, Weifeng,et al."A hot-compression bonding method for manufacturing large high-speed homogeneous steels".JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T 17(2022):507-520.