IMR OpenIR
Tailored Fully Lamellar Microstructure of a Newly Developed Mn-Containing beta-Solidifying gamma-TiAl Alloys Rolled Bar
Li, Xiaobing1; Qian, Kun1; Shu, Lei1; Zhang, Mengshu1; Chen, Bo1; Liu, Kui1,2
Corresponding AuthorChen, Bo(chenbo@jihualab.ac.cn)
2022-04-15
Source PublicationJOM
ISSN1047-4838
Pages11
AbstractA low-cost Mn-containing beta-solidifying gamma-TiAl alloys Ti-44Al-4Mn-0.8Mo-0.1B-0.1C (at.%) alloy (named as TMM alloy) was invented. Rolled bars with a diameter of 12 mm were fabricated by conventional hot rolling, which was carried out directly from the ingot without the pre-forging and near-isothermal canned conditions. The microstructure and mechanical properties of as-rolled and heat-treated alloy bars were investigated. The rolled microstructure consists of a small amount of alpha(2)/gamma lamellar structure, while plenty of fine-grained gamma and beta(o) phases at colony boundaries. The tensile properties at room temperature were obviously improved after hot rolling by refined microstructure. At 800 degrees C, the plastic elongation can reach as high as 80.0% but with 452 MPa tensile strength due to the high amount of gamma and beta(o) phase at colony boundaries. The fully lamellar microstructure can be tailored via two-step heat treatment including solution and aging treatments. At 800 degrees C, the tensile strength, elongation, and reduction of the area were 709 MPa, 4.5%, and 7%, respectively, which was much higher than the available wrought TiAl alloys. This study serves as a completely new low-cost beta-solidifying gamma-TiAl alloy which can be continuously hot-rolled under conventional conditions.
Funding OrganizationNational Natural Science Foundation of China ; Jihua Laboratory Scientific Research Project
DOI10.1007/s11837-022-05262-8
Indexed BySCI
Language英语
Funding ProjectNational Natural Science Foundation of China[51971215] ; Jihua Laboratory Scientific Research Project[X210291TL210]
WOS Research AreaMaterials Science ; Metallurgy & Metallurgical Engineering ; Mineralogy ; Mining & Mineral Processing
WOS SubjectMaterials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering ; Mineralogy ; Mining & Mineral Processing
WOS IDWOS:000782733700003
PublisherSPRINGER
Citation statistics
Document Type期刊论文
Identifierhttp://ir.imr.ac.cn/handle/321006/172895
Collection中国科学院金属研究所
Corresponding AuthorChen, Bo
Affiliation1.Ji Hua Lab, 28 Isl Ring South Rd,Guicheng St, Foshan 528200, Guangdong, Peoples R China
2.Chinese Acad Sci, Shi Changxu Innovat Ctr Adv Mat, Inst Met Res, Shenyang 110016, Peoples R China
Recommended Citation
GB/T 7714
Li, Xiaobing,Qian, Kun,Shu, Lei,et al. Tailored Fully Lamellar Microstructure of a Newly Developed Mn-Containing beta-Solidifying gamma-TiAl Alloys Rolled Bar[J]. JOM,2022:11.
APA Li, Xiaobing,Qian, Kun,Shu, Lei,Zhang, Mengshu,Chen, Bo,&Liu, Kui.(2022).Tailored Fully Lamellar Microstructure of a Newly Developed Mn-Containing beta-Solidifying gamma-TiAl Alloys Rolled Bar.JOM,11.
MLA Li, Xiaobing,et al."Tailored Fully Lamellar Microstructure of a Newly Developed Mn-Containing beta-Solidifying gamma-TiAl Alloys Rolled Bar".JOM (2022):11.
Files in This Item:
There are no files associated with this item.
Related Services
Recommend this item
Bookmark
Usage statistics
Export to Endnote
Google Scholar
Similar articles in Google Scholar
[Li, Xiaobing]'s Articles
[Qian, Kun]'s Articles
[Shu, Lei]'s Articles
Baidu academic
Similar articles in Baidu academic
[Li, Xiaobing]'s Articles
[Qian, Kun]'s Articles
[Shu, Lei]'s Articles
Bing Scholar
Similar articles in Bing Scholar
[Li, Xiaobing]'s Articles
[Qian, Kun]'s Articles
[Shu, Lei]'s Articles
Terms of Use
No data!
Social Bookmark/Share
All comments (0)
No comment.
 

Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.